Connections
Video connections
If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your AV receiver.
This unit has three types of video output jacks. Use the one that corresponds to the input jacks of the component to be connected.
This unit
|
|
|
|
| VIDEO |
|
|
|
| Y |
|
| COAXIAL | COMPONENT |
|
| |
AUDIO | DIGITAL PR/CR |
| PB/CB |
| |
OUT | OUT |
| VIDEO OUT |
| |
|
|
|
|
| Video pin |
|
| PR | PB | Y | V cable |
|
| (supplied) | |||
|
|
|
|
| |
<A> | <B> |
|
|
| <C> |
| PR | PB |
| Y |
|
PR/CR PB/CBY
COMPONENT VIDEO
VIDEO
|
|
|
|
| AV receiver |
|
|
|
|
|
|
S VIDEO |
| COMPONENT |
| VIDEO | |
OUT |
| VIDEO OUT |
| OUT | |
S VIDEO |
| COMPONENT |
| VIDEO | |
IN |
| VIDEO IN |
| IN | |
|
|
|
|
| TV |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCART terminal <A>
If your TV has only a terminal for video input, you can connect the TV directly to this unit.
Connect AV terminal of this unit to SCART input terminal of your TV using a commercially available SCART cable.
Note:
–Ensure that the “TV” indication on SCART cable is connected to the TV set and “DVD” indication on SCART cable is connected to this unit.
Component video jacks <B>
Component video connections achieve higher fidelity color reproduction than
Connect VIDEO OUT - COMPONENT (Y, PB/CB, PR/CR) jacks of this unit to component input jacks of your AV receiver and then to those of your TV using a commercially available component cable. Observe the color of each jack when you make connections. If your AV receiver does not have component output jacks, you can achieve a better video image by connecting the component output jacks of this unit directly to the component input jacks of your TV.
Composite video jack <C>
Connect VIDEO OUT - VIDEO jack of this unit to the video input jack of your AV receiver and then to that of your TV using the supplied video cable.
English
7En