Preparation
– TV System (NTSC/PAL Conversion)
Allows you to select between PAL, NTSC and AUTO mode depending on your TV.
The conversions supported are as follows:
| Disc | Output format | |||
Type |
| Format | Selected mode | ||
|
|
| NTSC | PAL | AUTO |
DVD |
| NTSC | NTSC | PAL60 | NTSC |
|
|
|
|
|
|
|
| PAL | Not | PAL | PAL |
|
| Supported | |||
|
|
|
|
| |
VCD |
| NTSC | NTSC | PAL60 | NTSC |
|
|
|
|
|
|
|
| PAL | NTSC | PAL | PAL |
|
|
|
|
|
|
1In the Personal Preferences Menu, select TV System.
2Press 3 or 4 to select PAL, NTSC or AUTO. Notes:
–If you have a PAL only TV, ensure that your TV System setting is PAL.
–AUTO can only be selected when using a TV that supports both the NTSC and PAL systems (multisystems).
–This setting is applicable for CVBS output on cinch only.
–Slight picture distortions may occur due to this conversion. This is normal. Thus, the AUTO format is most suitable for the best picture quality.
Sound
–Digital output
●Digital output selection enables you to specify the type of digital output suitable for your receiver.
●Select ALL (default setting), if you had connected your DIGITAL AUDIO OUT to a multichanel decoder receiver.
●Select PCM only if your receiver is not capable of decoding compressed/encoded input stream.
●Select OFF to deactivate the DIGITAL AUDIO OUT.
Note:
–Digital output is not available for MP3 discs.
1en | 1en | 1 | 2 |
Digital output |
| Off |
|
Analog output |
| PCM only |
|
Night mode |
| All |
|
– Analog output
Select Stereo, Dolby Surround-compatible or 3D Sound.
Stereo: In this setting, the 5.1 audio channels are
English
11