Favorite Track Selection Across Disc

Operation

4Use 1, 2, 3, 4 to pan across the screen.

5When ENTER/OK is pressed only the panned picture will be shown on the screen.

6To exit ZOOM mode, select zoom factor to “Off” (zoom factor 1) in the menu bar.

off

press OK to pan

Note:

–ZOOM mode gets deactivated when starting playback of next element in FTS across disc and Shuffle across Disc modes.

●This FTS function allows you to create a list favorite tracks by selecting tracks from different discs available in the disc tray.

●The supported discs are CDDA, MP3, VCD, SVCD.

●Favorite Track Selection (FTS) list contains up to 100 elements across all the discs on the tray.

Storing a Program

1Press OPEN/CLOSE and load preferred discs onto the disc tray.

2In STOP mode, select FTS in the menu bar.

3Press 4 in the menu bar.

➜ The FTS window menu appears.

4Select All Discs option.

Storing entire disc as the FTS

1Press 4 to select DISC.

2Use 2 and 1 to select the require disc list for all the loaded discs in the disc tray.

3Press ENTER/OK to store the entire disc selection.

Storing album/title

1Press 4 to select ALBUM/TRACK. Albums are for MP3 discs and Tracks for (S)VCD.

2Use 2 and 1 to select the require Album/Track.

3Press ENTER/OK to store the entire selected Album/Track.

➜ The Album/Track. number will be added to the program list.

Storing track/chapter

1Press 4 on the selected TRACK/INDEX. Tracks are for MP3/CDDA discs and Index for S(VCD).

➜The track/chapter number will be highlighted.

2Use 2 and 1 to select the required Track/Index.

3Press ENTER/OK to confirm the selection.

➜The selected Track/Index will be added to the program list.

4Press ON SCREEN to exit the FTS menu.

Switching a Program OFF

1Use 3/4 to move to FTS.

2Press 2 or 1 to select OFF.

3Press ON SCREEN to exit.

Erasing a selection in a Program

1While playback is stopped, select FTS in the menu bar.

2Use 4 to select PROGRAM.

3Use 2 and 1 to select the required number.

4Press ENTER/OK to erase the selection.

5Press ON SCREEN to exit.

Erasing all selections

1While playback is stopped, select FTS in the menu bar.

2Use 4 to select CLEAR ALL and press ENTER/ OK.

➜ All selections will be erased.

3Press ON SCREEN to exit.

Note:

– Pressing PLAYXCHANGE or OPEN/CLOSE during playback will erase the selected Program if any.

– With VCD 2.0, set the PBC (Playback Control) to Off.

English

FTS for a Single disc

1Select FTS in the menu bar.

2Press 4 in the menu bar.

➜ The FTS window menu appears.

3Select CURRENT DISC option.