Philips FW-C30/21 manual DIM mode, Sound Control, For Personal Listening, To switch off DBB

Page 11

DIM mode

You can select the desired brightness for the display.

Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.

The DIM display lights up.

"DIM 1", "DIM 2", "DIM 3" or "DIM OFF" will be displayed depending on the mode selected.

DIM OFF - normal brightness with Spectrum Analyzer On

DIM 1 - normal brightness with

Spectrum Analyzer Off

DIM 2 - half brightness with Spectrum Analyzer On

pg 01-24/C30/21&/30-En

11

DIM 3 - half brightness with Spectrum Analyzer Off and all LEDs on the system will be switched off.

Sound Control

VOLUME ADJUSTMENT

Adjust VOLUME to increase or decrease the sound level.

For Personal Listening

Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.

DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to enjoy special sound effects that have preset equalizer settings, providing the best music reproduction.

Adjust JOG CONTROL to select OPTIMAL, JAZZ, ROCK or TECHNO.

The Digital Sound Control display panel will light up respectively.

“OPTIMAL, JAZZ, ROCK or TECHNO” and the respective flag will be displayed.

Note:

When ”OPTIMAL” sound is selected, DBB will be switched on automatically.

DYNAMIC BASS BOOST (DBB) The DBB mode enhances the bass response.

Press DBB to switch on bass response.

The DBB button lights up.

“DBB ON” and the DBB flag will be displayed.

To switch off DBB

Press DBB again.

The DBB button light is switched off.

“DBB OFF” will be displayed.

Note:

Some CDs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.

3/3/00, 4:23 PM

OPERATING THE SYSTEM

MUTE (only on remote control)

This feature allows you to temporarily switch off the sound of the system without switching off the system when you require a moment of silence.

Press MUTE on the remote control to switch off the sound.

"MUTE" and the MUTE flag will be displayed.

Press MUTE again on the remote control or increase the VOLUME to switch on the sound.

3139 116 19351

English

11

Image 11
Contents 3139 116 Mini Hi-Fi SystemsEs necesario que lea cuidadosamente su instructivo de manejo MéxicoEspañol Français English Class Laser ProductEnglish General Information General Information Safety InformationAccessories Supplied Safety InformationRear Connections PreparationConnecting other Equipment to your system Adjusting the Operating VoltageRemote Control FM Wire Antenna ConnectionDisc ControlsControls on the system and remote control Operating the System Sound Control DIM modeTo switch off DBB Mute only on remote controlPlaying a CD Discs for playbackLoading the CD Changer CD Direct PlayPlaying the program Selecting a desired trackProgramming Tracks Reviewing the programSelecting External Equipment Shuffle only on remote controlRepeat only on remote control AUXTuner Storing Preset StationsTuning to radio stations For MW Band To change from 9 kHz to 10 kHz or vice versa Tuning to Preset Radio StationsStation, the display will show Repeat steps 3Tape Playback Press Stopopen When playback is stoppedTape Loading a tape Rewind/Fast ForwardKeep the mic away from the speakers to prevent howling KaraokeStart singing or talking through the microphone Press Stopopen on tape deck 1 to stop recording One Touch RecordingCD Synchro Start Recording For recording, use only tape of IEC type I normal tapeRecording from other sources Clock SettingRecording ClockTo switch off the Timer Timer Sleep TimerTimer Setting Timer will not activate if a recording is in progressSpecifications SpecificationsCD Player Operation MaintenanceTroubleshooting MaintenanceGeneral Tape Deck Operation