Philips FW-C30/21 AM Loop Antenna Connection, Adjusting the Operating Voltage, Remote Control

Page 7

AAM Loop Antenna

Connection

Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.

12 mm

unlock

lock

FAdjusting the Operating

Voltage

(not available for version /30)

Before connecting the AC power cord to the wall outlet, make sure that the voltage selector at the rear of the system is set to the local power line voltage. If not, reset

PREPARATION

Inserting batteries into the

English

Remote Control

•Insert the batteries (Type R06 or AA) into the remote control as shown in the battery compartment.

BFM Wire Antenna

Connection

Connect the supplied FM wire antenna to the FM AERIAL (FM ANTENNA) 75 Ω terminal. Adjust the position of the FM antenna for the best reception.

Outdoor Antenna

For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) 75 Ω terminal using a 75 Ω coaxial wire.

FM AERIAL 75Ω

FM ANTENNA 75Ω

OR

DConnecting other

equipment to your system

You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD Recorder to the AUX IN terminals at the rear of the system.

ESubwoofer Out Connection

Connect the optional active subwoofer to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass sound effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer.

the selector before connecting to the wall outlet.

GAC Power Supply

After all other connections have been made, connect the AC power cord to the system and to the wall outlet.

-

+

-

+

•To avoid damage from possible battery leakage, remove dead batteries or batteries that will not be used for a long time. For replacement, use type R06 or AA batteries.

CSpeakers Connection

•Connect the right speaker to Front terminal R, with the colored wire to + and the black wire to -.

•Connect the left speaker to Front terminal L, with the colored wire to + and the black wire to -.

•Clip the stripped portion of the speaker wire as shown.

pg 01-24/C30/21&/30-En

7

3/3/00, 4:23 PM

7

3139 116 19351

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 3139 116 Mini Hi-Fi SystemsEs necesario que lea cuidadosamente su instructivo de manejo MéxicoEspañol Français English Class Laser ProductEnglish General Information General Information Safety InformationAccessories Supplied Safety InformationRear Connections PreparationConnecting other Equipment to your system Adjusting the Operating VoltageRemote Control FM Wire Antenna ConnectionDisc ControlsControls on the system and remote control Operating the System Sound Control DIM modeTo switch off DBB Mute only on remote controlPlaying a CD Discs for playbackLoading the CD Changer CD Direct PlayPlaying the program Selecting a desired trackProgramming Tracks Reviewing the programSelecting External Equipment Shuffle only on remote controlRepeat only on remote control AUXTuning to radio stations Storing Preset StationsTuner For MW Band To change from 9 kHz to 10 kHz or vice versa Tuning to Preset Radio StationsStation, the display will show Repeat steps 3Tape Playback Press Stopopen When playback is stoppedTape Loading a tape Rewind/Fast ForwardStart singing or talking through the microphone KaraokeKeep the mic away from the speakers to prevent howling Press Stopopen on tape deck 1 to stop recording One Touch RecordingCD Synchro Start Recording For recording, use only tape of IEC type I normal tapeRecording from other sources Clock SettingRecording ClockTo switch off the Timer Timer Sleep TimerTimer Setting Timer will not activate if a recording is in progressSpecifications SpecificationsCD Player Operation MaintenanceTroubleshooting MaintenanceGeneral Tape Deck Operation
Top Page Image Contents