Disc Operations
IMPORTANT!
–If the inhibit icon (
or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.
–Depending on the DVD or VIDEO CD, some operations may be different or restricted.
–Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction.
Basic Playback
1Press STANDBY/ON on the front panel to turn on the DVD player.
2Press OPEN/CLOSE / on the front panel to open disc loading tray.
3Place the chosen disc in the tray, with the label facing up.
4Press OPEN/CLOSE / again to close the tray.
➜After recognizing this disc, the player begins to play back automatically.
➜If you press PLAY ( B ) when the tray is open, this unit closes the tray and starts playback.
General Operation
Unless otherwise stated, all operations described are based on Remote Control use.
Pausing playback
1During playback, press PAUSE ( ; ).
➜Playback will pause and sound will be muted.
2Press PAUSE ( ; ) again to select the next picture frame.
3To resume normal playback, press PLAY ( B ).
Selecting track/chapter
• Press S / T or use the numeric buttons to key in a track/chapter number.
➜If repeat mode is active, pressing S / T will replay the same track/chapter.
Searching backward/forward
• Press and hold S / T, then press PLAY ( B ) to resume normal playback.
➜While searching, pressing S / T again will decrease/increase the search speed.
Stopping playback
• Press STOP ( 9 ).
TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.
10