Setup Menu
Picture Setting
This DVD Player provides three predefined sets of picture color settings and one personal setting which you can define yourself.
1In ‘VIDEO SETUP PAGE’, press 34 to highlight [PICTURE SETTING], then press 2.
STANDARD
Select this for standard picture setting.
BRIGHT
Select this will make the TV picture brighter.
SOFT
Select this will make the TV picture softer.
PERSONAL
Select this to personalize your picture color by adjusting the brightness, contrast, tint and color (saturation).
2Press 34 to select a setting, then press ENTER/OK to confirm your selection.
3If you select [PERSONAL], then proceed to steps
➜The ‘PERSONAL PICTURE SETUP’ menu appears.
PERSONAL PICTURE SETUP |
| ||
BRIGHTNESS |
|
| 0 |
|
| ||
CONTRAST |
|
| 0 |
TINT |
|
| 0 |
COLOR |
|
| 0 |
|
|
|
|
4Press 34 to highlight one of the following options.
BRIGHTNESS
Increase the value will brighten the picture or vice versa. Choose zero (0) for average setting.
CONTRAST
Increase the value will sharpen the picture or vice versa. Choose zero (0) to balance the contrast.
TINT
Increase the value will darken the picture or vice versa. Choose zero (0) for average setting.
COLOR
Increase the value will enhance the color in your picture or vice versa. Choose zero
(0) to balance the color.
5Press 1 2 to adjust the setting that best suit your personal preference.
6Repeat steps
7Press ENTER/OK to confirm.
Switching the YUV/RGB
This setting allows you to toggle the output of the video signal between RGB (on SCART) and Y Pb Pr (YUV).
1In ‘VIDEO SETUP PAGE’, press 34 to highlight [COMPONENT], then press 2.
YUV
Select this for Y Pb Pr connection.
RGB
Select this for SCART connection.
2Press 34 to select a setting, then press ENTER/OK to confirm your selection.
TIPS: To return to the previous menu, press 1. To remove the menu, press SETUP.
22