Setup Menu
48KHz
Playback a disc recorded at the sampling rate of 48kHz. 96kHz (if available on disc) PCM data stream will be converted to 48kHz.
96KHz
Playback a disc recorded at the sampling rate of 96kHz. If the 96kHz disc is copy protected, the digital output will be muted to comply with the standards.
CD Upsampling
This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the upsampling, the player will automatically switch to stereo mode.
1In ‘AUDIO SETUP PAGE’, press 34 to highlight [CD UPSAMPLING], then press 2.
OFF
Select this to disable
88.2 kHz (X2)
Select this to convert the sampling rate of the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of the CDs four times higher than the original.
2Press 34 to select a setting, then press ENTER/OK to confirm your selection.
Note:
–This setting is only applicable for the signals output from the analog jacks.
Night Mode
In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favorite action movie without disturbing others at night.
1In ‘AUDIO SETUP PAGE’, press 34 to highlight [NIGHT MODE], then press 2.
ON
Select this to level out the volume. This feature is only available for movies with Dolby Digital mode.
OFF
Select this when you want to enjoy the surround sound with its full dynamic range.
2Press 34 to select a setting, then press ENTER/OK to confirm your selection.
Video Setup Menu
1Press SETUP.
2Press 1 2 to select ‘Video Setup’ icon.
3Press ENTER/OK to confirm.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
TIPS: To return to the previous menu, press 1. To remove the menu, press SETUP.
20