Using the Remote Control

RCA J20542 manual Using the Remote Control, Universal Remote Buttons CRK76TK1

Universal Remote Buttons (CRK76TK1)

ON•OFF Turns the TV on and off. When the remote is in another mode and the remote is programmed to operate that component, press ON•OFF to turn that component on and off.

L.E.D. Lights when you are programming the remote.

TV1 Turns on the TV and puts the remote in TV1 mode. Go to Chapter 1 for more information on TV1 mode.

VCR1 Puts the remote in VCR mode. If you set up Auto Tuning, pressing VCR1 tunes the TV to the correct channel.

VCR2 Puts the remote in VCR mode to control a second VCR. If you set up Auto Tuning, pressing VCR2 tunes the TV to the correct channel.

DVD Puts the remote in DVD mode. If you set up Auto Tuning, pressing DVD tunes the TV to the correct channel.

MUTE Lowers the volume to its minimum level. Press again to restore volume.

VOL (up and down) buttons Decrease or increase the TV’s volume, unless Volume Hold is enabled. Go to Chapter 1 for more information on Volume Hold.

CCDisplays the Closed-Caption Display.

GUIDE Displays the Channel Guide.

Arrow buttons (up, down, left, right) Use to move through the on-screen menus. Also moves PIP window to different areas on the screen.

MENU Displays the TV’s Main menu.

0-9 (Number buttons) Use to enter channel numbers and time settings. To enter a two-digit channel, press the two digits. To enter a three- digit channel, press and hold the first digit for two seconds until two dashes appear to the right of the number, then add the second two.

WHO•INPUT In TV mode, press to toggle through the available Video Input channels. In SAT mode, press to select available channel lists.

REVERSE Press REVERSE to go backwards on a videotape or disc.

RECORD If the remote is in VCR mode, press to start recording.

VCR1	ON OFF	TV1
DVD	VCR2 TV2 SATCABLE
MUTE	CH +	SKIP
	CH +
L		V
O		V
O		O
V		O
		L
	CH-
CC		GO BACK
GUIDE	S	INFO
GUIDE	YSTEM	INFO
	OK
MENU		CLEAR

1 2 3

4 5 6

7 8 9

WHO INPUT

ANTENNA

REVERSE PLAY FORWARD

RECORD STOP PAUSE

PIP SWAP CH CTRLRESET

u n i v e r s a l

PIP, SWAP and CH CTRL do not have a function for these models

TV2 Turns on the TV and puts the remote in TV2 mode. Go to Chapter 1 for more information on TV2 mode.

SAT•CABLE Puts the remote in SAT•CABLE mode. If you set up Auto Tuning, pressing SAT•CABLE tunes the TV to the correct channel.

SKIP If you press SKIP before you change the channel, the TV waits 30 seconds and then goes back to the original channel. Each subsequent press adds 30 seconds to the skip time. Press CLEAR to cancel.

CH (up and down) buttons Scan up or down through the current channel list.

GO BACK Tunes to the last selected channel or video input.

SYSTEM This button allows the remote to change between TV1 and TV2 mode. It also allows access to system-defined functionality, when available. See the description later in this chapter for more details.

INFO Displays channel information.

OK Press OK to select a menu item that is highlighted.

CLEAR Removes any menu or display from the screen and returns you to TV viewing.

ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button in SAT•CABLE mode.

FORWARD Press to advance a videotape or disc.

PLAY Plays a videotape or disc.

PAUSE Press to pause playback.

STOP Stops playing a videotape or disc.

RESET Returns the picture to the original settings and displays the Picture Presets choice list.

Graphics contained within this publication are for representation only.

Chapter 2