RCA 1543007A manual Connecting External Speakers with 3-Way Operation, Cleaning the TV/VCR

Page 35

References

Connecting External Speakers with 3-Way Operation

1. Plug in the external speaker .

Depress the black tab and insert the black speaker wire into the speaker jack. Depress the red tab and insert the red (or other color) speaker wire into the speaker jack.

2. Set the speaker switch to the desired selection:

INT	Listen to the TV/VCR’s audio only through the internal
	speaker.
BOTH	Listen to the audio through both the internal speaker and an
	external speaker connected to the external speaker jacks.
EXT	Listen to the audio only through the external speaker
	connected to the external speaker jacks.

Caution: If the switch is in the EXT position and no external speaker is connected, you will not be able to hear the TV/VCR’s audio.

Note: The external speaker must be a minimum of 8 ohms. Connecting a speaker of less than 8 ohms could damage the TV/VCR.

	—	+
BOTH
INT.	EXT.

IN FROM

ANTENNA

INPUT

AUDIO VIDEO

Replacing the Fuse in the DC Car Cord

1. Unscrew the end of the plug by turning it counterclockwise. When you remove the end, you will see the fuse.

2. Replace the fuse with a new 250-volt, 10-amp fuse (available from your local dealer).

3. Screw end (with new fuse attached) back on plug.

Cleaning the TV/VCR

Turn off the TV/VCR before cleaning.

You can clean the TV/VCR as required by using a soft cloth or the dusting attachment of your vacuum cleaner. Be sure to occasionally vaccuum the ventilation slots in the cabinet to help assure adequate ventilation.

To clean the TV/VCR screen, use a soft cloth dampened with a diluted soap and water mixture. Do not use furniture polish on the TV/VCR cabinet or screen.

While cleaning, do not spray liquid directly on the screen or allow liquid to run down the screen or inside the TV/VCR. Also, avoid placing drinks or vases with water on top of the TV/VCR. This could increase the risk of fire, shock hazard, or damage to the TV/VCR.

33

Image 35

Contents USER’S Guide Product Registration Important InformationTable of Contents Place your TV/VCR on a stable surface Unpack the TV/VCR and accessoriesStartup Insert batteries in remoteTurn on the TV/VCR Connect antenna or cable-TV systemPlug in the TV/VCR Put Channels into Memory Auto Channel Search Set the Signal Type optionalPress 5 to toggle the Signal Type between Antenna and Cable Select the language Escoja un idioma./Choisissez une langueSet the Time and Date Clock Select a channel and adjust the volumeAdd or remove channels from the TV/VCR’s memory FF Fast Forward ButtonsChan and v Channel up and down ADV Frame AdvanceREC Record VOL and Volume up and downNumbers 0 through Prev Previous channelPress Display with tape inserted Using the TV/VCR FeaturesAdjust the Video On-Screen DisplaysCommercial Skip Commercial Skip works only when there is no tapeClosed Captioning To View Closed CaptionsFront Panel Block Sleep TimerWake-Up Timer Situations S Parental Controls and V-ChipSuggestive dialogue D To Block Age-Based Ratings Setting TV Rating LimitsBlock Blocking Specific Content ThemesViewing Age-Based Ratings MenuPress 2 for the V-Chip Movie Rating Limit screen Viewing Specific Content ThemesSetting Movie Rating Limits Blocking Movie RatingsPress 4 to unlock Parental Controls Viewing Movie RatingsBlocking Unrated TV Programs Lock/Unlock Parental ControlsTo Play a Tape Operating InstructionsPicture Search Using the Playback FeaturesPause Frame AdvanceCommercial Scan Automatic TrackingManual Tracking Time CounterAuto Repeat Feature Auto Play FeaturePress SKIP/SEARCH to display the Index Search screen Index SearchPress Stop to stop Blank Search Zero SearchBlank Search Recording Pause Recording FeaturesAutomatic Head Cleaner Recording SpeedsBasic Recording How to Make a RecordingTypes of Recordings Time How to Use Express RecordingExpress Recording Press RecordingPress 1 to Create a New Program Timer RecordingSetting a Timer Recording Press 2 to Review Existing Progs. programs Checking or Clearing Timer RecordingsStopping a Timer Recording Press Pause at the same time on both the VCR or Copying and Editing TapesFront Panel Choose one answer from below Back PanelChoosing a Hookup What type of Cable-TV system* do you have? Connect as shown Connect Antenna or Cable System Without a Cable Box Dipole Antenna Cable Box Required to Unscramble Premium Channels Only Plug in power cords of TV/VCR and cable box OperationConnect a Cable System With a Cable Box Cable Box Required to Unscramble All ChannelsCamcorder for Copying Tapes Connect a VCR or Camcorder for Copying TapesVCR for Copying Tapes Replacing the Fuse in the DC Car Cord Connecting External Speakers with 3-Way OperationCleaning the TV/VCR Set the speaker switch to the desired selectionTrouble Checks Problem SolutionParental Control password does not work Timer recording not madeTV/VCR makes noise when stopped Timer REC indicator on front of TV/VCRLimited Warranty Index Search 11-15Index Meridian Street Indianapolis,