References
Trouble Checks
Problem | Solution |
Timer recording not made | • Program entered incorrectly (wrong channel or times). See page 25. |
or wrong program recorded | • Cable box was not turned on and tuned to the correct channel at time |
| recording was to begin. |
| • Power interruption. TIMER REC indicator flashes on front of TV/VCR. |
| • Check to see if the TV/VCR’s time and date are correct — including AM/PM. |
| See page 5. |
| • Program exceeded tape’s length or tape was not rewound beforehand. |
| • No tape in TV/VCR, or cassette ejected if safety tab broken off. |
|
|
Clock shows incorrect time or date | • Power interruption. TIMER REC indicator flashes on front of TV/VCR. |
| • Clock was not set accurately (check AM/PM and date). See page 5. |
|
|
TV/VCR makes noise when stopped | • TV/VCR is removing tape from heads. This is normal. The head cylinder |
| inside the TV/VCR will continue to rotate for a few minutes after you put the |
| VCR in the stop mode. |
|
|
Will not auto channel search active | • Check antenna or cable connections. |
channels correctly |
|
|
|
Cannot see closed captions on screen | • Closed caption function must be set to on. See page 9. |
| • Station may not be broadcasting closed captions. |
|
|
Box appears on screen | • A text feature has been selected. See page 9. |
|
|
TIMER REC indicator on front of TV/VCR | • Power interruption. Check time and date setting (clock). See page 5. |
is flashing | • Timer program set and TV/VCR turned off with no cassette or cassette with |
| no safety tab inserted. See page 25. |
|
|
Tape plays over and over | • Auto repeat turned on. See page 19. |
|
|
Tape starts playing automatically | • Auto play feature turned on. See page 19. |
|
|
TV/VCR turns off automatically | • Sleep timer turned on. Press TV or VCR to turn TV/VCR back on. |
|
|
TV/VCR turns on automatically | • Wake up timer (alarm) turned on. See page 10. |
|
|
Cannot record one program while watching | • TV/VCR only has one tuner. Only one program can be watched and recorded |
a different program | at the same time. |
Parental Controls are not blocking programs
• Make sure Parental Control is turned on. See pages
Parental Control password does not work
• Reset Parental Control password. See page 15.
Front Panel Buttons won’t work
• Front Panel Block is on. See page 10.
35