References
Trouble Checks
Sometimes problems can be easily solved by checking a few basic things. Check below before you call for help or take your TV/VCR to an Authorized RCA VCR Servicenter.
|
|
| Problem | Solution |
| ||
|
|
|
|
|
| ||
|
|
| No power in AC mode | • Plug TV/VCR into an operating outlet. |
| ||
|
|
|
| • Check connections. |
| ||
|
|
|
| • Make sure the wall outlet is not controlled by a wall switch. |
| ||
|
|
|
|
|
| ||
|
|
| No power in DC mode | • Automobile cigarette lighter socket must be 12 volt negative ground system |
| ||
|
|
|
| • Make sure cigarette lighter socket is working properly. |
| ||
|
|
|
| • Check the fuse in the DC car cord. |
| ||
|
|
|
|
|
| ||
|
|
| TV/VCR does not respond to remote | • In DC mode, you must press the TV or VCR button for 3 seconds to turn on |
| ||
|
|
|
| the set. |
| ||
|
|
|
| • Aim remote at TV/VCR’s remote sensor with no objects between them. |
| ||
|
|
|
| • Change batteries and make sure they are properly installed. |
| ||
|
|
|
|
|
|
|
|
|
|
| Poor or no picture during TV viewing | • Switch to an active channel. |
| ||
|
|
|
| • Check antenna connections. If using a dipole antenna, try adjusting its rods. |
| ||
|
|
|
| • Check picture adjustments. See page 8. |
| ||
|
|
|
| • Make sure the line input is not selected. Repeatedly press 00 on the remote to |
| ||
|
|
|
| switch between audio/video input jacks and tuner. |
| ||
|
|
|
|
|
|
| |
|
|
| No sound | • Press VOLUME up to increase sound. |
| ||
|
|
|
| • Sound has been muted. Press MUTE on remote or VOLUME up. |
| ||
|
|
|
| • Check the external speaker switch on the back of the TV/VCR to ensure that |
| ||
|
|
|
| it is in the correct position. See page |
| ||
|
|
|
|
|
|
| |
|
|
| Snow or streaks in picture or no picture | • Check tape — it may be worn out or of poor quality. Try another tape. |
| ||
|
|
| during tape playback | • Some snow/streaks are normal during search, pause, frame advance, and |
| ||
|
|
|
|
| |||
|
|
|
| • Press one of the TRACKING buttons on the remote or CHANNEL up or down |
| ||
|
|
|
| on the TV/VCR to move the streaks up or down and out of the picture. |
| ||
|
|
|
|
|
| ||
|
|
| Will not record or play | • No cassette in TV/VCR. |
| ||
|
|
|
| • Eject and |
| ||
|
|
|
| • Broken tape — try another cassette. |
| ||
|
|
|
| • Safety tab removed from cassette — TV/VCR will not record. |
| ||
|
|
|
| • TV/VCR is in pause mode. Press PAUSE on the remote. |
| ||
|
|
|
|
|
| ||
|
|
| Cannot insert or eject tape | • Insert cassette with window facing up and safety tab facing out. |
| ||
|
|
|
| • To remove cassette, TV/VCR must be connected to working outlet. |
| ||
|
|
|
| • Turn POWER off and then on before trying to insert or remove cassette. |
| ||
|
|
|
|
|
| ||
|
|
| Time counter not working | • Press DISPLAY on remote to display time counter on screen. See page 18. |
| ||
|
|
|
| • The time counter does not advance during unrecorded portions of tape. |
| ||
|
|
|
| When an unrecorded segment of tape is encountered, the time counter will |
| ||
|
|
|
| hold its count until recorded material is detected again. |
| ||
|
|
|
| • A minus |
| ||
|
|
|
| farther back than a counter reading of 0:00:00. |
|
Rewind does not operate
• Tape already rewound.
34