![](/images/new-backgrounds/1164011/16401137x1.webp)
TV OPERATION
WATCHING A TV PROGRAM
TV/VCR
1Turn on the TV/DVD/VCR
Press the POWER button to turn on the
TV/DVD/VCR.
2Select the channel number
Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control.
Note for using the Number button on the remote control:
¡When selecting cable channels which are higher than 99, press +100 first, then, press the last two digits. (Example: to select channel 125, first press “+100” then press “2” and “5”).
¡You must precede
Remember: If the TV/DVD/VCR is connected to a cable box or satellite box, the TV/DVD/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
3Adjust sound
Press the VOLUME button X or Y to adjust the volume.
VOLUME 20
C C C C C C C C C C C C
NOTES:
•If you press the CHANNEL button o or pin the DVD mode, you can change the TV channels.
Even if you turn off the TV/DVD/VCR in the DVD mode, when you turn it on again, it will go into the TV/VCR mode.
DEGAUSSING
TV/VCR
Magnetism from nearby appliances and speakers might affect the color of the TV picture.
If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, turn off using the POWER button, then turn it on again 30 minutes or so later (27” model), or unplug the power cord, then plug it in again 30 minutes or so later (19” model).
PICTURE CONTROL
TV/VCR
The TV/DVD/VCR’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.
NOTES:
•Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.
•When setting the Picture Control, the Game mode will be cancelled.
Make sure ...
•TV/DVD/VCR power must be turned on.
1Select “PICTURE CONTROL”
Press the PICTURE button on the remote control.
2Select item you want to adjust
Press the Arrow button K or L until desired control is displayed.
BRIGHT |
|
CONTRAST |
|
COLOR |
|
TINT | BRIGHT |
| – P P P P P P P C P P P P P P P + |
SHARPNESS |
|
3Adjust the picture control
Press the Arrow button B or s to adjust to your desired level.
| Arrow button s | Arrow button B |
|
|
|
BRIGHT | to decrease | to increase |
| brightness | brightness |
CONTRAST | to decrease | to increase |
| contrast | contrast |
|
|
|
COLOR | to pale | to brilliant |
|
|
|
TINT | to purple | to green |
|
|
|
SHARPNESS | to soft | to clear |
|
|
|
•If there is a power failure of any kind, the TV/VCR/DVD will retain its memory for this fea- ture.
- 19 - | EN |
1C29