Emerson EWC19T3 owner manual Automatic Timer Recording, Channel CH61 Tape Speed SP

AUTOMATIC TIMER

RECORDING

TV/VCR

You may set the TV/DVD/VCR to start and end a recording while you are away. You can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period.

In the example below, the timer is being set to record:

DATE:July 4th, 2003

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

•If a cable box or satellite box is connected with the TV/DVD/VCR you will be limited to record only one channel. And the channel selector on the TV/DVD/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual chan- nel to be recorded must be selected on the boxes.

•Clock must be set to the correct time and date before setting the timer.

•TV/DVD/VCR power must be turn on to program it.

•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

•The channel you want to record is properly set in advance. (See page 16.)

Avoid over lap of programs ...

There is a chance that a program will not be record- ed. when programs overlap;

•The program with an earlier start has priority.

•Once the earliest program finishes, the overlapping programs will begin recording in sequence.

•The illustration below demonstrates the sequence of recordings.

Program 1 10:00AM - 11:00AM

Program 2 9:00AM - 10:00AM

Program 3 9:30AM - 12:00PM

1Select “TIMER PROGRAMMING”

Press the SETUP button on the remote control.

Confirm “TIMER PROGRAM- MING” is pointed by pressing the Arrow button K. And press the ENTER button.

•If you have not yet set the clock, “MANUAL CLOCK SET” appears. If so, follow stops [3] to [8] on page 17. Then set the timer recording.

2Select your desired program

TV/DVD/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

4Select once, every day or weekly recording

For once recording :

– TIMER PROGRAMMING –

For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday)

Recording Sequence

Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM

*Recording period is SHADED

For weekly recording : To record a TV program at the same time on the same channel every week. (Example: every Monday)