Emerson EWC19T3 Search Function, Track Search, Title / Chapter Search, Marker Setup Screen

CD

There are three ways to begin playback on an Audio CD at a specific Track.

Using the Number buttons on the remote control

1Press the Number buttons to enter the

desired Track number.

¡Playback will start at the selected track.

¡For single digit tracks (1-9), press a single number (eg. track 3, press 3).

¡To play track 26, press +10, 2, 6.

Using the SEARCH MODE button

1Press the SEARCH MODE button.

¡The track search display appears.

2Within 30 seconds, select a desired track number using the Number buttons on the

remote control.

¡For single digits press 0 first.

¡Playback will start at the selected track.

Using the SKIP H G buttons

During playback, press the SKIP G button to move the next track. Press it repeatedly to skip subsequent tracks. Press the SKIP H button to go back to begin- ning of the current track. Press it repeatedly to go to the previous tracks.

¡If the SKIP button is pressed while the playback is paused, the playback will be paused again after skip- ping to the next track.

NOTE

¡The SKIP H G buttons are not available when playback is stopped.

TITLE / CHAPTER SEARCH

DVD-V

1Press the SEARCH MODE button once for the Chapter search, twice for the Title search during playback.

/2

2Enter the desired chapter/title number using

the Number buttons on the remote control.

¡Playback will start at the selected Chapter or Track. ¡Press the CLEAR button to erase the incorrect input. ¡For single digits press 0 first.

DVD-V CD

1During playback, press the SEARCH MODE button three times (CD: twice) to display the Time Search on the TV screen.

2Within 30 seconds, enter a desired disc time using the Number buttons on the

remote control.

¡Playback will start at the specified time.

¡Press the CLEAR button to erase the incorrect input.

MARKER SETUP SCREEN

DVD-V CD

Use markers to memorise your favorite places on a disc.

1Press the SEARCH MODE button four times

(CD: three times) during playback.

¡The display screen and Markers will appear on the TV screen.

2Press the Arrow buttons (s/ B) to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “- : - - : - -” appears in the display.

3When reaches the desired point, press the ENTER button.

¡The Title or Track and elapsed playing time will appear in the TV screen.

4To return to the Marker later, press the SEARCH MODE button four times (CD: three times) during playback and the Arrow but- tons (s/ B) to choose the desired marker,

then press the ENTER button.

NOTES

¡Opening the disc tray or turning off the power or select AC at step 2 and press the ENTER button will erase all Markers.

¡To clear a marker, using the Arrow buttons (s/ B), position the cursor on to the marker number to be cleared and press the CLEAR button.

¡You can mark up to 10 points.

5Press the SEARCH MODE or RETURN but- ton to exit.