Sylvania SRC2213B owner manual SET UP for USE, External Input Mode, Installing the Batteries

Page 10

TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL

1.Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to record from your Cable Converter Box or Satellite Box.

EXTERNAL INPUT MODE

When using an external input signal (another VCR or video camera), connect the player’s audio/video out- put cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the CHANNEL K or L button until “AUX” appears on the screen.

NOTE: “AUX” is found below the

lowest memorized channel.AUX (Example: CH2)

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1Plug in the TV/VCR power cord

Plug the TV/VCR power cord into a standard AC outlet.

NOTE:

If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

2Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR

3Select “ENGLISH” or “ESPAÑOL”

Select “ENGLISH” or

– SET UP –

“ESPAÑOL”=Spanish using the

B LANGUAGE

F.FWD/B or REW/s button. “[ ]”

[ENGLISH] ESPAÑOL

AUTO PRESET

indicate the selected language.

 

 

 

4 Begin auto preset

– SET UP –

Press the PLAY/K or STOP/L but-

LANGUAGE

ton to point to “AUTO PRESET”.

[ENGLISH] ESPAÑOL

 

Then press the F.FWD/B button.

B AUTO PRESET

 

The tuner scans and memorizes all active channels in your area.

NOTES:

The TV/VCR distinguishes between standard TV channels and cable channels.

If you want to play or record a video tape BEFORE presetting the tuner, you must press the MENU button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 12.

The TV/VCR may memorize TV channels as CATV channels if reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better.

5After scanning

The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L.

- 10 -

EN

1K09

Image 10
Contents SRC2213B SRC2319 Important Safeguards S2 8 9 8 a Avoid the Hazards Electrical Shock and Fire PrecautionsLocation Important Copyright InformationTable of Contents IndiceFeatures Supplied AccessoriesTV/VCR Front Panel Remote ControlOperating Controls and Functions TV/VCRRear View Preparation for USE ANTENNA/CABLE ConnectionsInstalling the Batteries SET UP for USEExternal Input Mode Channel SET UP for First TimeTo Change Clock Setting Clock SET UP Auto / ManualManual Clock Setting To Select a Desired ChannelDeleting or Adding Channel SET UP AgainAutomatic Clock Setting ChannelSelecting the Language To Cancel the DAYLIGHT-SAVING TimeDAYLIGHT-SAVING Time Added channel Light blueWatching a TV Program Game ModeTV Operation Picture ControlClosed Caption System Chip SET UPChip SET UP Selection Rating Category ExplanationsChanging V-CHIP Blocked PRO Chip SET UP SUB RatingsMpaa Rating SET UP GrammingNormal Playback PlaybackAuto Repeat Playback Picture Search To Cancel the Repeat Play ModeSearch Zero ReturnPicture Controls Still PictureTWO Different Tape Speeds RecordingNormal Recording Skipping Unwanted Scenes During Recording Tape Speed Recording/Playback Time Type of tapeChannel CH61 Tape Speed SP Timer RecordingPushes Display Recording length Avoid over lap of programsFor weekly recording To record a Timer Program ExtensionFor once recording To set another program, repeat steps 2 toWake UP Timer Hints for Automatic Timer RecordingAuto Return To Cancel the Sleep Timer Sleep TimerTo Cancel the Wake UP Timer Copying a Video TapeOn Screen Display Special FeaturesMaintenance Real Time Tape CounterProblem Corrective Action Troubleshooting GuideClosed Caption Problem Possible Remedy Electrical Specifications SpecificationsGeneral Specifications Other SpecificationsBotones de canales Channel K/ L Botones de volumen Volume X / YBotón de la alimentación Power Función de seguimiento- Pulse los botonesIndicador de grabación Record 18 Botón de velocidad de cinta SpeedConexiones DE ANTENA/CABLE Para Grabar UN Canal CODIFICADO/DESCODIFICADORepetición DE LA Preparación DE Canales AutopreseleccionNotas CercióreseGet it fixed, at your home or ours Canada