Sylvania SRC2213B owner manual Normal Playback, Auto Repeat Playback

Page 17
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _

CHANGE ACCESS CODE

To change access code, follow the steps.

1Select “V-CHIP SET UP”

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select “V-

CHIP SET UP”.

Then, press the F.FWD/B button.

2 Enter Access code

ACCESS CODE

Use the number on the remote con-

 

 

trol to enter the access code.

 

_ _ _ _

 

 

The default code is 0000.

 

 

3

Select “CHANGE CODE”

– V-CHIP SET UP –

 

TV RATING

MPAA RATING

Press the PLAY/K or STOP/L but- B CHANGE CODE ton to select "CHANGE CODE".

Then, press the F.FWD/B button.

4Enter New code

Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

•If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space.

5Exit the V-Chip setting mode

Press the MENU button on the remote control to exit the screen.

Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

PRECAUTIONS

•Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECTWRONG

NORMAL PLAYBACK

Make sure ...

•TV/VCR power must be turned on.

1Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/VCR will start playback automatically.

2To begin playback

PLAY B

Press the PLAY button.

Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU but- ton to clear the menu. then, press the PLAY button.

3 To stop playback

STOP

Press the STOP button when play- back is completed.

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button.

ALL REPEAT: Repeat playback from the beginning to the end of the tape.

BLANK REPEAT: Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.

1 Select “USER’S SET UP”

– M E N U –

Press the MENU button on the

PICTURE CONTROL

 

TIMER PROGRAMMING

remote control.

SETTING CLOCK

CHANNEL SET UP

Press the PLAY/K or STOP/L but-

B USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

ton to point to “USER’S SET UP”.

CAPTION [OFF]

TIME SEARCH

 

ZERO RETURN

Then, press the F.FWD/B button.

 

- 17 -

EN

1K09

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SRC2213B SRC2319 Important Safeguards S2 8 9 8 a Location PrecautionsAvoid the Hazards Electrical Shock and Fire Important Copyright InformationIndice Table of ContentsSupplied Accessories FeaturesOperating Controls and Functions Remote ControlTV/VCR Front Panel TV/VCRRear View ANTENNA/CABLE Connections Preparation for USEExternal Input Mode SET UP for USEInstalling the Batteries Channel SET UP for First TimeManual Clock Setting Clock SET UP Auto / ManualTo Change Clock Setting To Select a Desired ChannelAutomatic Clock Setting Channel SET UP AgainDeleting or Adding ChannelDAYLIGHT-SAVING Time To Cancel the DAYLIGHT-SAVING TimeSelecting the Language Added channel Light blueTV Operation Game ModeWatching a TV Program Picture ControlChip SET UP Chip SET UPClosed Caption System Selection Rating Category ExplanationsMpaa Rating SET UP Chip SET UP SUB RatingsChanging V-CHIP Blocked PRO GrammingAuto Repeat Playback PlaybackNormal Playback Search To Cancel the Repeat Play ModePicture Search Zero ReturnStill Picture Picture ControlsNormal Recording Skipping Unwanted Scenes During Recording RecordingTWO Different Tape Speeds Tape Speed Recording/Playback Time Type of tapePushes Display Recording length Timer RecordingChannel CH61 Tape Speed SP Avoid over lap of programsFor once recording Timer Program ExtensionFor weekly recording To record a To set another program, repeat steps 2 toAuto Return Hints for Automatic Timer RecordingWake UP Timer To Cancel the Wake UP Timer Sleep TimerTo Cancel the Sleep Timer Copying a Video TapeMaintenance Special FeaturesOn Screen Display Real Time Tape CounterClosed Caption Problem Possible Remedy Troubleshooting GuideProblem Corrective Action General Specifications SpecificationsElectrical Specifications Other SpecificationsBotón de la alimentación Power Botones de volumen Volume X / YBotones de canales Channel K/ L Función de seguimiento- Pulse los botones18 Botón de velocidad de cinta Speed Indicador de grabación RecordPara Grabar UN Canal CODIFICADO/DESCODIFICADO Conexiones DE ANTENA/CABLENotas AutopreseleccionRepetición DE LA Preparación DE Canales CercióreseCanada Get it fixed, at your home or ours
Top Page Image Contents