Sylvania SRC2213B owner manual Picture Controls, Still Picture

Page 19

4Begin Time Search

By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.

The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.

TO CANCEL THE TIME SEARCH at this point

Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.

PICTURE CONTROLS

TRACKING ADJUSTMENT

•Tracking adjustment will be set automatically (Digital Tracking function) when you start play- back.

•However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the play- back picture. If this occurs, you can adjust the tracking control manually by pressing the CHAN- NEL K or L button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again.

STILL PICTURE

You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the

RENTAL PLAYBACK

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.

SLP mode will show the least amount of lines.Press the PLAY button to return to playback.

NOTES:

• Usually there will be video “noise” lines (black

and white streaks or dots) on the screen. This is

normal.

If the tape was originally recorded in SP or LP

1Select “USER’S SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

mode, the still picture will be black and white in

addition to the “noise” lines.

This is not a fault of the machine, but is a limi-

tation of a TV/VCR with 2 video heads.

• If it is left in the Pause mode for more than five

minutes, the TV/VCR will automatically switch to

the Stop mode.

NOISE CANCEL (in the Still mode)

This feature allows you to reposition or reduce the noise lines of a still picture. Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety with- out distracting noise lines.

NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button.

NOTE:

If there are video noise lines on the screen, reposition or reduce them. Refer to “NOISE CANCEL”.

2 Set “RENTAL” to [ON]

– USER’S SET UP –

 

 

Press the PLAY/K or STOP/L but-

B RENTAL

[ON]

ton to point to “RENTAL”.

REPEAT PLAY

[OFF]

AUTO RETURN

[OFF]

 

 

Press the F.FWD/B or REW/s button until [ON] appears.

3Exit the Rental setting

Press the MENU button on the remote control to return to the TV mode.

4Start playback

Press the PLAY button to start playback. “RENTAL PLAY B” appears.

•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

- 19 -

EN

1K09

Page 18 Page 20
Image 19
Page 18 Page 20
Contents SRC2213B SRC2319 Important Safeguards S2 8 9 8 a Important Copyright Information PrecautionsLocation Avoid the Hazards Electrical Shock and FireIndice Table of ContentsSupplied Accessories FeaturesTV/VCR Remote ControlOperating Controls and Functions TV/VCR Front PanelRear View ANTENNA/CABLE Connections Preparation for USEChannel SET UP for First Time SET UP for USEExternal Input Mode Installing the BatteriesTo Select a Desired Channel Clock SET UP Auto / ManualManual Clock Setting To Change Clock SettingChannel Channel SET UP AgainAutomatic Clock Setting Deleting or AddingAdded channel Light blue To Cancel the DAYLIGHT-SAVING TimeDAYLIGHT-SAVING Time Selecting the LanguagePicture Control Game ModeTV Operation Watching a TV ProgramSelection Rating Category Explanations Chip SET UPChip SET UP Closed Caption SystemGramming Chip SET UP SUB RatingsMpaa Rating SET UP Changing V-CHIP Blocked PRONormal Playback PlaybackAuto Repeat Playback Zero Return To Cancel the Repeat Play ModeSearch Picture SearchStill Picture Picture ControlsTape Speed Recording/Playback Time Type of tape RecordingNormal Recording Skipping Unwanted Scenes During Recording TWO Different Tape SpeedsAvoid over lap of programs Timer RecordingPushes Display Recording length Channel CH61 Tape Speed SPTo set another program, repeat steps 2 to Timer Program ExtensionFor once recording For weekly recording To record aWake UP Timer Hints for Automatic Timer RecordingAuto Return Copying a Video Tape Sleep TimerTo Cancel the Wake UP Timer To Cancel the Sleep TimerReal Time Tape Counter Special FeaturesMaintenance On Screen DisplayProblem Corrective Action Troubleshooting GuideClosed Caption Problem Possible Remedy Other Specifications SpecificationsGeneral Specifications Electrical SpecificationsFunción de seguimiento- Pulse los botones Botones de volumen Volume X / YBotón de la alimentación Power Botones de canales Channel K/ L18 Botón de velocidad de cinta Speed Indicador de grabación RecordPara Grabar UN Canal CODIFICADO/DESCODIFICADO Conexiones DE ANTENA/CABLECerciórese AutopreseleccionNotas Repetición DE LA Preparación DE CanalesCanada Get it fixed, at your home or ours
Top Page Image Contents