Disc Handling
Handling precautions
•Sticking a label on the disc may impair DVD-R playback.
•Do not attach sticker to disc. (Do not use discs with exposed adhesive from tape or left over
•Only hold disc by edges as shown below. Fingerprints, dirt and scratches can cause skipping and distortion.
•Do not write on label side of disc.
•Never use record cleaning sprays, benzine, thinner, static electricity prevention liquids, or any other solvent.
•Do not try to close disc tray when disc is not properly placed.
Region Management Information
This unit is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this unit, this unit cannot play this disc.
For U.S.A. and Canada
• The region number of this player is “1”.
•The player will play
Example:
1 ALL 124
|
| Disc |
Disc tray |
To clean disc surface
With a soft, damp (water only) cloth, gently wipe from the center hole to the outer edge as shown below. (Wiping in a circular pattern will scratch the surface.)
•DVD-RAM, DVD-R :
Clean only with the
If disc is brought from a cold to a warm environment, moisture may form on the disc
Wipe away moisture with a soft, dry,
Improper disc storage
Discs can be damaged if stored or left in these environment:
•Exposed to direct sunlight.
•Areas that are humid or dusty.
•Near heat (i.e. heater, radiator, etc.).
10 |
|
For assistance, please call : | |
|