Cancel a Timer Recording: (Recording is in progress)
Hold down STOP for a few seconds to cancel the Timer Recording.
•Any future daily or weekly recordings will be performed as programmed.
Review, Replace or Clear Program Contents : (Recording is not in progress)
1Press PROG to display SET PROGRAM screen.
2Press ▲▼ to select “TIMER PROGRAMMING.”
3Press SET to display screen.
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :PROG
4Press ▲▼ to select the desired program.
P DT | START STOP | CH SPD | ||
1 | 10 | 9:00a12:00p | 08 | SP |
2day | 11:00a11:30a125 | SP | ||
3 | 12 | 8:00p 9:30p | L1 | SLP |
4 | ||||
| CANCEL:ADD/DLT |
|
| |
| SELECT: | SET:SET | ||
| END | :PROG |
|
|
To Replace program...
a. Press SET to display.
b. Press ▲▼ to select and press SET or ◄► to set new program contents.
c. Press PROG.
P START STOP CH SPD 10 9:00a12:00p 08 SP 11:00a11:30a125 SP 3 12 8:00p 9:30p L1 SLP
4
CANCEL:ADD/DLT
SELECT: SET:SET
EXIT :PROG
To Clear program...
Press ADD/DLT.
P DT START STOP CH SPD 1
2day 11:00a11:30a125 SP 3 12 8:00p 9:30p L1 SLP 4
SELECT: SET:SET
END :PROG
5 Press PROG twice to exit this mode.
Notes
•2 minutes before Timer recording is performed, “PLEASE PREPARE FOR TIMER REC” appears and/or the PROG TIMER Indicator flashes. Be sure a cassette with record tab is loaded and the unit is in Stop mode.
•If the start times of two programs overlap, the lower numbered program will have priority.
•If the start time for a Timer Recording comes up during a normal recording or One Touch Recording (page 31), the Timer Recording will not be performed.
•If there is a power interruption of more than one minute, the recording may not be performed or continued.
•If “INCOMPLETE” appears after all items have been set, check all entries and make necessary corrections.
VCR Operation
35