Tape Operation
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
1 | INDEX SEARCH |
ENTER INDEX NUMBER:1 |
US I NG
FORWARD SEARCH:FF
REVERSE SEARCH:REW
EX I T : SEARCH
Press SEARCH in Playback or Stop mode to display
INDEX SEARCH screen, and then
press number keys
to select the recording number.
NUMBER Keys
SEARCH
•To calculate number, see below.
Press FF or REW to start search.
FF
REW
2 | INDEX SEARCH |
FORWARD SEARCH:FF
REVERSE SEARCH:REW
Play begins at search end.
To search forward or back 1 index, press FF or REW while screen
left is displayed (10 sec.).
To cancel, press PLAY.
■To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 | 2 | 3 | 4 |
| 5 | 6 | 7 |
|
|
|
|
|
|
|
|
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 | 2 | 3 | 4 | 5 | 6 | 7 |
NOTE: indicates start points of each recording.
FF
REW
Note
•If Index Search is started very close to an index mark, that index mark may not be counted in the search.
22 | For assistance, please call : |