CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this TV/VCR/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hook- ing the TV/VCR/DVD up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use audio coaxial digital cables available at retail for the audio connections.
Center
speaker
Front speaker (left)
Dolby Digital decoder
Surround
speaker (left)
NOTES:
Front speaker | ANT. | AUDIO OUT |
| COAXIAL | |
|
| |
(right) |
|
|
|
| To DIGITAL AUDIO OUT |
To COAXIAL DIGITAL | (PCM/BITSTREAM) | |
AUDIO INPUT jack | COAXIAL jack | |
Surround | Subwoofer |
|
speaker |
|
|
(right) |
|
|
[Fig. 7]
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD.
•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)
•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/VCR/DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the
- 14 - | EN |
1C29