PLAYBACK
NORMAL PLAYBACK
TV/VCR
Make sure ...
•TV/VCR/DVD power must be turned on.
1Insert a prerecorded tape
If the
2 | To begin playback | PLAY B |
|
Press the PLAY button.
3 To stop playback | STOP |
Press the STOP button when play- back is completed.
NOTES:
•If you press the PLAY button (of the TV/VCR side) in the DVD mode, you can start the VCR playback.
•If you press the SELECT button during the VCR playback, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or the OPEN/CLOSE button.
TRACKING ADJUSTMENT
TV/VCR
•Tracking adjustment will be set automatically (Digital Tracking function) when you start play- back.
•However when playing
•You can reduce the noise lines by pressing the CHANNEL button K or L in slow mode too. Tracking adjustment in Slow mode will not be set automatically.
SLOW MOTION
TV/VCR
Press the PAUSE button, then press the F.FWD g button to start the playback in slow motion. The TV/VCR/DVD mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If it is left in the Slow mode for more than five minutes, the TV/VCR/DVD will automatically go into the Stop mode.
STILL PICTURE
TV/VCR
You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE button during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press the PLAY button to return to playback.
NOTES:
•You can advance the picture one frame at a time by pressing the PAUSE button during the Still mode.
•If it is left in the Pause mode for more than five minutes, the TV/VCR/DVD will automatically switch to the Stop mode.
VERTICAL HOLD CONTROL
TV/VCR
In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL button K or L.
NOTE:
If there are video noise lines on the screen, see Tracking Adjustment section.
- 26 - | EN |
1C29