Sylvania 6319CE, 6313CE owner manual Picture Control, Degaussing, Wake UP Timer, Game Mode

PICTURE CONTROL			TO CANCEL THE GAME MODE
			Press [GAME] or [CHANNEL K/L] on the remote
The unit’s picture controls – BRIGHT, CON-
			control.
TRAST, COLOR, TINT and SHARPNESS – are
				DEGAUSSING
preset to factory specifications. Although they are
usually the best, you may need to make some further
			This television has a degaussing circuit that will clear
adjustments for a more natural looking image.
NOTE:			up color errors on the TV screen that are caused by
• When setting the Picture Control, the Game mode			any excess magnetism which happens to get too close
will be cancelled.			to the TV. This circuit is designed to operate once
Make sure ...			when the set is first plugged in. If minor color errors
			are seen in some locations on the screen, please
• The unit power must be turned on.
			unplug the TV for approximately 30 minutes. When
			the TV is plugged back in, the degaussing circuit will
1 Select “PICTURE CONTROL”
		– M E N U –	operate once to clear them up. Repeat this procedure
Hit [MENU] on the remote control.		TIMER PROGRAMMING	any time the TV screen is accidentally magnetized or
		SETTING CLOCK
Press [PLAY/K] or [STOP/L] to		B PICTURE CONTROL	when the TV is moved or relocated.
		USER’S SET UP
		CHANNEL SET UP
point to “PICTURE CONTROL”.		V-CHIP SET UP
		CAPTION [OFF]
		LANGUAGE [ENGLISH]
Then, hit [F.FWD/ B].		ZERO RETURN		WAKE UP TIMER
		TIME SEARCH
			The Wake Up Timer function turns on the unit
2 Select item you want to adjust
			without using [POWER] after a desired period of
Press [PLAY/K] or [STOP/L]
			time.
until desired control is displayed.
			NOTES:
BRIGHT
			• Use the remote control for this procedure.
CONTRAST
		BRIGHT	•	Clock must be set to the correct time before setting
COLOR
		– P P P P P P P C P P P P P P P +		the timer.
TINT			• If you want to select [TAPE], you must insert a
SHARPNESS				cassette tape in the unit. The tape will start
				playback automatically on your desired time.
3 Adjust the picture control
				1 Call up “WAKE-UP TIMER” setting
Press [REW/s] or [F.FWD/ B] to adjust to your
			Hit [WAKE-UP/SLEEP] once, and
desired level within 5 seconds.
			confirm “ON/OFF” is pointed.
			Press [REW/s] or [F.FWD/ B]
	REW/s	F.FWD/B
			until “ON” appears.
					WAKE UP B ON/OFF		[ON]
BRIGHT	to decrease	to increase
					TIMER	TV/TAPE	[TV]
	brightness	brightness				TIME	[12:00AM]
CONTRAST	to decrease	to increase
				2 Select “TV” or “TAPE”
	contrast	contrast
			Press [PLAY/K] or [STOP/L]
COLOR	to pale	to brilliant
			until to point to “TV/TAPE”.
TINT	to purple	to green
			Press [REW/s] or [F.FWD/ B],
SHARPNESS	to soft	to clear	and select [TV] or [TAPE].		WAKE UP	ON/OFF	[ON]
					TIMER	TIME	[12:00AM]
						B TV/TAPE	[TV]

•Even if there is a power failure of any kind, the

unit will retain its memory for this feature.			3 Set wake up time
			Press [PLAY/K] or [STOP/L] until
GAME MODE
			to point to “TIME”.
This function enables you to decrease the TV screen			Press [REW/s] or [F.FWD/ B]
			until your desired wake up time
contrast and making it suitable for use with a video
			appears.
game.				WAKE UP	ON/OFF	[ON]
			Each additional press will increase	TIMER	TV/TAPE	[TV]
NOTE: This function CANNOT be set during
					B TIME	[12:00AM]
			(or decrease) the time by 10
recording.
			minutes.
Hit [GAME] on the remote control.
“GAME” appears on the screen.	GAME
When you hit [GAME];			4 Exit the Wake Up Timer setting
• The unit comes on automatically			Hit [MENU] to return to TV mode.
if it is off.			TO CANCEL THE WAKE UP TIMER
• The unit will be in external input
			Select [OFF] at step 1.
mode automatically.
		- 11 -				EN