Sylvania 6319CE, 6313CE owner manual Preparation for USE, ANTENNA/CABLE Connections

Page 9

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

Plug the incoming cable into the ANT. jack on the rear of the unit.

If your cable service supplies you with a converter box or if you use a satellite system, connect the box with this unit as shown below.

Cable

or

Antenna

TV signal

 

Incoming cable from home Antenna /

Cable Company (No Cable Box)

OR

Cable Box or

Satellite Box*

 

OUT

 

IN

Rear of the unit

ANT.

Incoming cable from Cable Company or Satellite Antenna

*NOTE (DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

NOTE:

Before plugging the antenna into the ANT. jack of the unit, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT. jack of the unit.

Bent pin

 

Cable Plug

 

(Needs to be

(Straight pin)

straightened)

 

Rod Antenna Connection:

You can use the Rod Antenna

 

Rod Antenna

 

(Supplied)

(Supplied) if incoming cable

 

 

 

is not available.

 

 

ANT.

For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack before moving the unit.

- 9 -

EN

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 6313CE 6319CE Important Safeguards S2 8 9 8 a Location PrecautionsAvoid the Hazards Electrical Shock and Fire Important Copyright InformationIndice Table of ContentsSupplied Accessories FeaturesOperating Controls and Functions Remote ControlRear View Installing the BatteriesANTENNA/CABLE Connections Preparation for USEUsing Front A/V Input Jacks TV Operation and SettingsWatching a TV Program To Watch Cable or Satellite ChannelGame Mode Wake UP TimerPicture Control DegaussingSleep Timer Channel SET UPClosed Caption System Manual Clock Setting Clock SET UP Auto / ManualADDING/DELETING Channels Hit F.FWD/ BAutomatic Clock Setting To Change Clock SettingClock CH Search Clock CHDAYLIGHT-SAVING Time To Cancel the DAYLIGHT-SAVING TimeMenu Language REW/s or F.FWD/ B untilChip SET UP Chip SET UPTV Rating SET UP Mpaa Rating SET UPVideo Cassette Playback Tracking AdjustmentNormal Playback Still PictureTo Cancel the Repeat Play Mode To Cancel the Rental ModeSpecial Playback Rental PlaybackSearch To Cancel During Time SearchZero Return Picture SearchRecording Special FeaturesTimes Display Recording length Press the Number buttons or Channel K/LTimer Recording Automatic Timer RecordingPLAY/K, then hit F.FWD/ B Auto Return OFF mode Clock/Counter mode OFF mode Counter mode Clock modeOn Screen Display Cable Channel DesignationsTroubleshooting Guide Problem Corrective ActionClosed Caption Problem Possible Remedy Maintenance SpecificationsNota Controles DE Operación Y SUS FuncionesVista Posterior Funciones Y Ajustes Preparación Para LA UtilizaciónConexiones DE ANTENA/CABLE Ajuste DEL RelojIdioma DEL Menú Reproduccion NormalGrabación Normal NotasDuration TelPlease do not Ship Your Unit to the Teterboro Address
Top Page Image Contents