Sylvania SSC191 owner manual Manual Clock Setting, To Change Clock Setting, Please Note

MANUAL CLOCK SETTING

Make sure ...

•TV/VCR power must be turned on.

In the example below, the clock is to be set to:

DATE	May 1st, 2001
SETTING TIME	5:40PM

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

6 Select the hour	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until your desired hour appears.	0 5	/ 0 1	TUE 2 0 0 1
(Example: 5, PM)	HOUR	MINUTE
Then, press the F.FWD/B button.	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR

2Select “MANUAL CLOCK SET”

Press the PLAY/K or STOP/L but-	– SETTING CLOCK –
ton to point to “MANUAL CLOCK	AUTO CLOCK		[ON]
SET”.	AUTO CLOCK CH [AUTO]
Then, press the F.FWD/B button.	B MANUAL CLOCK SET
	D.S.T.		[OFF]
3 Select the month	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until your desired month	0 5 / – – – – – – – – –
appears. (Example: May → 05)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
4 Select the day	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until your desired day appears.	0 5 / 0 1 – – – – – – –
(Example: 1st → 01)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-
	MONTH DAY		YEAR
ton until your desired year appears.
	0 5	/ 0 1	TUE 2 0 0 1
(Example: 2001)	HOUR	MINUTE
Then, press the F.FWD/B button.
	– –	: – –	– –

ton until the desired minute	0 5	/ 0 1	TUE 2 0 0 1
appears. (Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM

8 Start the clock

5:40 PM

Press the MENU button on the remote control.

Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the

remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

- 15 - EN

1B15