Sylvania SSC191 owner manual Playback

Page 23

PLAYBACK

NORMAL PLAYBACK

Make sure ...

• TV/VCR power must be turned on.

1 Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/VCR will start playback automatically.

2 To begin playback

PLAY B

Press the PLAY button.

3 To stop playback

STOP

Press the STOP button when play- back is completed.

TRACKING ADJUSTMENT

•Tracking adjustment will be set automatically (Digital Tracking function) when you start play- back.

•However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the play- back picture. If this occurs, you can adjust the tracking control manually by pressing the CHAN- NEL K or L button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again.

•You can reduce the noise lines by pressing the CHANNEL K or L button in slow mode, too. Tracking adjustment in Slow mode will not be set automatically.

NOTE:

•In Still mode, press the SLOW button and press the CHANNEL K or L button until streaks disappear. To return to Still mode, press the PAUSE/STILL button again.

SLOW MOTION

Press the SLOW button to reduce the playback speed. The TV/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If it is left in the Slow mode for more than five minutes, the TV/VCR will automatically go into the Stop mode.

PICTURE SEARCH

This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)

2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the pic- ture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

STILL PICTURE

You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines.Press the PLAY button to return to playback.

NOTES:

•You can advance the picture one frame at a time by pressing the PAUSE/STILL button during the Still mode.

•If it is left in the Pause mode for more than five minutes, the TV/VCR will automatically switch to the Stop mode.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button.

NOTE:

If there are video noise lines on the screen, see Tracking Adjustment section.

- 23 -

EN

1B15

Page 22 Page 24
Image 23
Page 22 Page 24
Contents SSC191 Important Safeguards S2 8 9 8 a Important Copyright Information PrecautionsLocation Avoid the Hazards Electrical Shock and FireIndice Table of ContentsSupplied Accessories FeaturesVideo Cassette 7 8 Operating Controls and FunctionsRear View VHF/UHF Separate Antennas Preparation for USEANTENNA/CABLE Connections VHF/UHF Combined AntennaTo Record a SCRAMBLED/UNSCRAM- Bled Channel Installing the BatteriesExternal Input Mode Cable with CONVERTER/ Descrambler BOX or Satellite BOXDeleting or Adding Channel SET UP for USEChannel SET UP for First Time Selecting the Language Channel SET UP AgainTo Cancel the DAYLIGHT-SAVING Time DAYLIGHT-SAVING TimeAuto Clock Setting Clock SET UP Auto / ManualPlease Note Manual Clock SettingTo Change Clock Setting Auto REWIND-EJECT Special FeaturesOn Screen Display Real Time Tape CounterPicture Control Game ModeTV Operation Watching a TV ProgramCAPTION1, CAPTION2 To Cancel the Closed Caption SystemWhen the Closed Caption Mode is on Closed Caption SystemTV Rating SET UP Chip SET UPMpaa Rating SET UP Selection Checking the Selected MTS ModeMTS RECORDING/MONITOR Mode STEREO/SAPTo Select STEREO, SAP, or Mono To Select Hifi Mode To Select Mono ModeSelecting the MTS System Playback Rental Playback To Cancel the Rental ModeTo Cancel the Repeat Play Mode Special PlaybackTime Search SearchZero Return Index Search Skipping Unwanted Scenes During Recording RecordingNormal Recording OTR One Touch Recording Manual Clock SET TimerAutomatic Timer Recording Channel CH61 Tape Speed SPTo Correct a Program Timer Program ExtensionTo Cancel AN Automatic Timer Recording Auto Return Hints for Automatic Timer RecordingWake UP Timer To Cancel the Auto Return ModeSleep Timer MaintenanceTV/VCR Troubleshooting GuideProblem Corrective Action Closed Caption Problem Possible RemedyOther Specifications SpecificationsGeneral Specifications Electrical SpecificationsControles DE Operación Y SUS Funciones Conexiones DE ANTENA/CABLE Preparación DE Canales POR Primera VEZ Memo Memo Please do not Ship Your Unit to the Teterboro Address Duration
Top Page Image Contents