In the example below, the clock is to be set to:
DATE | May 6th, 2004 |
SETTING TIME | 5:40PM |
8Start the clock
Press the MENU button on the remote control.
5:40 PM
1Select “SETTING CLOCK”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
Although seconds are not dis- played, they begin counting from
00 when you press the MENU but- ton on the remote control. Use this
feature to synchronize the clock with the correct time.
NOTE:
Then, press the F.FWD/B button.
2Select “MANUAL CLOCK SET”
Press the PLAY/K or STOP/L | – SETTING CLOCK – | ||||
button to point to “MANUAL | AUTO CLOCK |
| [ON] | ||
CLOCK SET”. | AUTO CLOCK CH SEARCH | ||||
AUTO CLOCK CH | [ 02 ] | ||||
B MANUAL CLOCK SET |
| ||||
Then, press the F.FWD/B button. | D.S.T. |
|
|
| [OFF] |
|
|
|
|
| |
|
|
|
|
|
|
3 Select the month | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L | MONTH DAY | YEAR | |||
button until your desired month | 0 5 / – – – – – – – – – | ||||
appears. (Example: May → 05) | HOUR |
| MINUTE |
| |
|
|
| |||
Then, press the F.FWD/B button. | – – | : – – | – – |
| |
|
|
|
|
| |
|
|
|
| ||
4 Select the day | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until your desired day appears. | 0 5 | / | 0 6 | – – – | – – – – |
| |||||
(Example: 6th → 06) | HOUR |
| MINUTE |
| |
Then, press the F.FWD/B button. | – – | : – – | – – |
| |
|
|
|
| ||
5 Select the year | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until your desired year appears. | 0 5 | / 0 6 | THU | 2 0 0 4 | |
(Example: 2004) | HOUR |
| MINUTE |
| |
Then, press the F.FWD/B button. | – – | : – – | – – |
| |
|
|
|
|
| |
|
|
|
| ||
6 Select the hour | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until your desired hour appears. | 0 5 | / 0 6 | THU | 2 0 0 4 | |
(Example: 5, PM) | HOUR |
| MINUTE |
| |
Then, press the F.FWD/B button. | 0 5 | : – – | PM |
| |
|
|
|
|
| |
|
|
|
| ||
7 Select the minute | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until the desired minute | 0 5 | / 0 6 | THU | 2 0 0 4 | |
| |||||
appears. (Example: 40) | HOUR |
| MINUTE |
| |
| 0 5 | : 4 0 | PM |
| |
When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps [1] and [2].
2)Select where you want to change using the F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or STOP/L button.
4)Press the MENU button on the remote control to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•The TV/VCR is turned on.
•Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR.
NOTE:
•If a cable converter box is being used, make sure it is powered on.
•You must use the TV/VCR remote control to per- form the clock setting procedure.
•If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS sta- tion must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.
- 11 - | EN |