TIME SEARCH
The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.
•After index search, the TV/VCR will play the tape automatically.
•In some cases, the index mark at the beginning of video tape cannot be detected.
NOTES:
•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.
•This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, in either direction.
1Insert a tape.
2 Select “TIME SEARCH” mode | TIME SEARCH |
| 2 : 50 |
Press the TIME SEARCH button (with each push it will increase by 10 minutes).
SLOW MOTION
Press the SLOW button to reduce the playback speed. The TV/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If left in the Slow mode for more than five minutes, the TV/VCR will automatically go into the Stop mode.
RENTAL PLAYBACK
This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.
3Enter your desired time
Press the PLAY/K or STOP/L button until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes)
If you wish to cancel the Time Search at this point, press the MENU button on the remote control.
1Select “USER’S SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP
BUSER’S SET UP
TIME SEARCH INDEX SEARCH
4Begin Time Search
By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.
The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.
TO CANCEL THE TIME SEARCH at this point
2 Set “RENTAL” to [ON] | – USER’S SET UP – | |
Press the PLAY/K or STOP/L but- | B RENTAL | [ON] |
ton to point to “RENTAL”. | REPEAT PLAY | [OFF] |
AUTO RETURN | [OFF] | |
Press the F.FWD/B or REW/s button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to return to the TV mode.
Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.
INDEX SEARCH
An index signal is recorded on the tape automatically when the recording is started. To view a recording at a specific start point:
– M E N U –
4Start playback
Press the PLAY button to start playback. “RENTAL PLAY B” appears.
•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
1)Press the MENU button on the | PICTURE CONTROL |
|
|
| TIMER PROGRAMMING | Repeat steps [1] and [2], select [OFF] using the |
|
remote control. Press the PLAY/K | SETTING CLOCK |
| |
CHANNEL SET UP | F.FWD/B or REW/s button on the remote control. | ||
| |||
or STOP/L button to point to | USER’S SET UP |
|
|
LANGUAGE [ENGLISH] | Press the MENU button on the remote control to |
| |
“INDEX SEARCH”, then press | CAPTION [OFF] |
| |
ZERO RETURN | return to TV mode. |
| |
| B INDEX SEARCH |
| |
the F.FWD/B button. | TIME SEARCH |
|
|
| If there is a power failure of any kind, the unit |
| |
2)Press the PLAY/K or STOP/L button within 30 sec- |
| ||
will remember the setting. |
| ||
onds until the number of programs that you want to |
| ||
|
| ||
skip appears. |
|
|
|
3)Press the F.FWD/B or REW/s button to start |
|
| |
index search. If you want to go forward, press the |
|
| |
F.FWD/B button. If you want to go back, press the |
|
| |
REW/s button. | - 19 - | EN | |
| |||