Sylvania SRCD420P owner manual Connecting to External Input Jacks, Installing the Batteries

TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL

1.Set the TV/VCR/DVD channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to record on your Cable Converter Box or Satellite Box.

Note to CATV system installer:

This reminder is provided to call the CATV sys- tem installer’s attention to Article 820-40 of the NEC that provides guidelines for proper ground- ing and in particular, specifies that the cable ground shall be connected to the grounding sys- tem of the building as close to the point of cable entry as practical.

CONNECTING TO EXTERNAL

INPUT JACKS

When you watch a program recorded on another source (VCR, video camera or video game), use the audio/video input jacks on the front of the TV/VCR/DVD.

Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/VCR/DVD.

Then press the CHANNEL button K or L until “AUX” appears on the screen.

NOTE:

•When you connect a monaural VCR (another source) to this TV/VCR/DVD, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/VCR/DVD. The audio will output in both L and R channel equally.

	To the audio
	output jacks
[Another source]
	HEADPHONE VIDEO	L AUDIO R
	Audio/Video
	cable
	(not supplied)
etc.
To the video	[Front of the
	TV/VCR/DVD]
output jack

[Fig. 5]

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

EXTERNAL INPUT MODE

When using an external input signal (another VCR, video camera or video game), connect the player’s audio/video output cables to the

AUDIO L/R IN/ VIDEO IN jacksAUX of your TV/VCR/DVD. Then press

the CHANNEL button K or L until “AUX” appears on the screen.

- 12 - EN

1C29