Sylvania SRCD420P owner manual To Cancel the DAYLIGHT-SAVING Time

NOTE: During Auto Clock CH Search, the picture may be distorted, this is normal.

4Enter the channel number that contains the Automatic Clock Setting Signal

DAYLIGHT-SAVING TIME

TV/VCR

Select this feature and the TV/VCR/DVD’s clock automatically will advance one hour in April, then

Press the SETUP button on the remote control.

Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu. Press the Arrow button L to select “AUTO CLOCK CH”.

Press the ENTER button or the Arrow button s or B until you locate Auto Clock Set station num- ber. See step [3] on page 16.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

– SETTING CLOCK –

AUTO CLOCK	[ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH	[ 45]
MANUAL CLOCK SET
D.S.T.	[OFF]

reverse one hour in October.

When Daylight-Saving Time is ON, the clock will change automatically as follows:

•First Sunday of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.

•Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.

Make sure ...

•Press the POWER button to turn on the TV/VCR/DVD.

Press the SETUP button to exit the screen.

5Turn off the TV/VCR/DVD

Once the TV/VCR/DVD is turned off , it will period- ically check and set the correct date and time.

1Select “SETTING CLOCK”

Press the SETUP button on the remote control.

Press the Arrow button K or L to point to “SETTING CLOCK”. Then press the ENTER button.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

2Set “D.S.T.” (Daylight-Saving Time) to [ON]

Press the Arrow button K or L to	– SETTING CLOCK –
point to “D.S.T.”.	AUTO CLOCK	[ON]
Then press the ENTER button until	AUTO CLOCK CH SEARCH
	AUTO CLOCK CH	[ 02 ]
[ON] appears.	MANUAL CLOCK SET
	B D.S.T.	[ON]

3Exit the Daylight-Saving Time mode

Press the SETUP button on the remote control to return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING TIME

Repeat steps [1] to [2], select [OFF] using the ENTER button.

- 17 - EN

1C29