TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL
1.Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3)
2.Select the channel to record from your Cable Converter Box or Satellite Box.
EXTERNAL INPUT MODE
When using an external input signal (another VCR or camcorder), connect the player’s audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the CHANNEL K or L button until “AUX” appears on the screen.
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity
3)Replace the cover.
NOTE: “AUX” is found below the lowest memorized channel. (Example: CH2)
AUX
SET UP FOR USE
SELECTING THE LANGUAGE
1Plug in the TV/VCR power cord
Plug the TV/VCR power cord into a standard AC outlet.
NOTE:
• If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.
•If you want to play or record a video tape BEFORE presetting the tuner, you must press the MENU button on the remote control. To preset the tuner again, see “CHANNEL SET UP” on page 13.
Make sure ...
•Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.
2 Select “LANGUAGE” | – M E N U – |
Press the MENU button on the | TIMER PROGRAMMING |
PICTURE CONTROL | |
remote control. | SETTING CLOCK |
USER’S SET UP | |
| CHANNEL SET UP |
Press the PLAY/K or STOP/L but- | |
CAPTION [OFF] | |
| B LANGUAGE [ENGLISH] |
ton to point to “LANGUAGE”. | ZERO RETURN |
TIME SEARCH |
3Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish, or “FRANÇAIS”= French using the F.FWD/B or REW/s button.
4Exit the Language mode
Press the MENU button on the remote control to return to TV mode.
NOTE: If for some reason the menu is in Spanish or French, press the MENU button on the remote con- trol, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then press the F.FWD/B button, then press the MENU button on the remote control.
CLOCK SET UP
(AUTO / MANUAL)
The TV/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR. Then, set to [ON] the auto clock setting which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only.
- 10 - | EN |
9I03