MANUAL CLOCK SETTING
Make sure ...
•The TV/VCR is turned on.
In the example below, the clock is to be set to:
DATE | May 6th, 2004 |
SETTING TIME | 5:40PM |
8 Start the clock
Press the MENU button on the
remote control. | 5:40 PM |
| |
Although seconds are not displayed, |
|
they begin counting from 00 when |
|
you press the MENU button on the |
|
remote control. Use this feature to |
|
1Select “SETTING CLOCK”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH
synchronize the clock with the correct time. |
NOTE:
When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
2Select “MANUAL CLOCK SET”
Press the PLAY/K or STOP/L | – SETTING CLOCK – | |||
button to point to “MANUAL | AUTO CLOCK |
| [ON] | |
CLOCK SET”. | AUTO CLOCK CH SEARCH | |||
B MANUAL CLOCK SET | ||||
| AUTO CLOCK CH | [ 02 ] | ||
Then, press the F.FWD/B button. | D.S.T. |
|
| [OFF] |
|
|
|
| |
|
| |||
3 Select the month | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | |
ton until your desired month | 0 5 / – – – – – – – – – | |||
appears. (Example: May → 05) | HOUR | MINUTE |
| |
Then, press the F.FWD/B button. | – – | : – – | – – |
|
|
|
|
| |
|
| |||
4 Select the day | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | |
ton until your desired day appears. | 0 5 / 0 6 – – – – – – – | |||
(Example: 6th → 06) | HOUR | MINUTE |
| |
Then, press the F.FWD/B button. | – – | : – – | – – |
|
|
| |||
5 Select the year | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | |
ton until your desired year appears. | 0 5 | / 0 6 | THU | 2 0 0 4 |
(Example: 2004) | HOUR | MINUTE |
| |
Then, press the F.FWD/B button. | – – | : – – | – – |
|
|
|
|
| |
|
| |||
6 Select the hour | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | |
ton until your desired hour appears. | 0 5 | / 0 6 | THU | 2 0 0 4 |
(Example: 5, PM) | HOUR | MINUTE |
| |
Then, press the F.FWD/B button. | 0 5 | : – – | PM |
|
|
|
|
| |
|
|
|
|
|
7 Select the minute | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | |
ton until the desired minute | 0 5 | / 0 6 | THU | 2 0 0 4 |
|
|
|
| |
appears. (Example: 40) | HOUR | MINUTE |
| |
| 0 5 | : 4 0 | PM |
|
1)Follow steps [1] and [2].
2)Select where you want to change using the F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or STOP/L button.
4)Press the MENU button on the remote control to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•The TV/VCR is turned on.
•Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR.
NOTE:
•If a cable converter box is being used, make sure it is powered on.
•You must use the TV/VCR remote control to per- form the clock setting procedure.
•If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually chan- nel 3 or 4), to be able to set up or correct the clock automatically.
- 11 - | EN |
9I03