Magnavox MC09D1MG owner manual Tape Speeds, Recording options are on pages

Page 24

MC09D1MG 3/22/02 1:16 PM Page 24

24 Recording

Read and follow the steps below to record a TV program.

 

Place a tape with its record tab intact (see page

 

five) in the TV/VCR. The power will come on. Or, if

 

1 the tape is already in the TV/VCR, press

 

POWER to turn on the TV/VCR, if necessary.

 

Press SPEED until the desired tape speed

1

appears on the TV/VCR screen. See tape speed

2 details below.

Use CH(annel) o/p or the Number buttons to

 

select the channel you want to record.

 

3 You cannot change channels during recording.

 

Press RECORD once to start recording. The

 

REC(ord) light will glow. If the tape does not have a

 

4 record tab the TV/VCR will eject the tape. Insert

 

another tape.

 

To pause the recording (for example, during

4-5

commercials), press PAUSE/STILL. The

5 REC(ord) light will flash. To resume recording,

 

press PAUSE/STILL again or press RECORD.

 

The REC(ord) light will glow.

 

6 To stop recording, press STOP/.

 

POWER

 

 

SLEEP/WAKE UP

6

 

PLAY

 

3

REW

STOP

F.FWD

MENU

DISPLAY

ALT.CH

 

 

 

 

1

2

 

3

 

4

5

 

CH.

 

 

6

 

7

8

 

9

 

 

0

+100 VOL.

3

SPEED

RESET

PAUSE/STILL

RECORD

 

TIME SEARCH

 

 

 

2

5

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. A tape will play only in the speed in which it was recorded. When recording, you can change the tape speed using the SPEED button. You cannot record in LP speed.

The slower the speed, the more programming you can fit on the tape. SLP is the slowest speed.

 

Cassette type / Playback Time

Tape Speed

T160

T120

T60

SP(Standard Play)

2 hrs.

2

hrs.

1 hr.

 

40 mins.

 

 

 

 

LP(Long Play)

5 hrs.

4

hrs.

2 hrs.

(playback only)

20 mins.

 

 

 

SLP(Super Long Play)

8 hrs.

6

hrs.

3 hrs.

 

 

 

 

 

 

Helpful Hints

You cannot record one channel while watching another.

Recording options are on pages 25-30.

If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage.

You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.

Image 24
Contents MC09D1MG Dear Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Battery SafetyUsing the Remote Control TV/VCR MaintenanceHook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRBefore you turn on the TV/VCR, go to page eight Fuse Replacement Car battery cordMobile Connections To Cigarette LighterSetting TV Channels for the First Time Press MENU. Press PLAY/ or STOP/ to select Language Remove the menuResetting TV Channels Adding/Deleting Channels With CHannelSetting the Clock Auto Clock SettingBefore you begin, make sure Channels are set. Details are on pages eightSetting the Clock cont’d Setting the Clock cont’d Manual Clock SettingManual Clock SET Month DAY Setting Clock Auto Clock Auto Clock CH Manual Clock SET Daylight-Savings TimePower Button Reset ButtonPLAY/ Button REW/ rewind ButtonFront Panel Rear Panel ANTenna JackDC 13.2V Jack AC 120V JackOn-Screen Status Displays Press F.FWD/B or REW/s to adjust the con- trol Power failsPlaying Insert a tape in the TV/VCRPlayback Options Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureRecording Tape SpeedsRecording options are on pages Recording stops when 000 is reached One-Touch RecordingDisplay Recording length Presses To stop an OTR, press STOP/pTimer Recording Tion. Then, press F.FWD/BNumber appears. Example CH61 Then press For a one-time recording, press PLAY/ untilPress PLAY/ or STOP/ until the desired end Hour appears. Example 830PM Then, pressFWD/B Minute appears. Example 850PM PressTimer Recording cont’d Extending a Timer RecordingCorrecting a Timer Recording Cancelling Timer RecordingsTimer Recording Auto Return Select USER’S SET UP. Then, press F.FWD/ BPress MENU. Press PLAY/ or STOP/ to Rerecording Tape Duplication Repeat Play Press PLAY/ or STOP/ to select RepeatPress F.FWD/B or REW/s repeatedly until ALL or Blank appearsTo Cancel Rental Playback Rental PlaybackZero Return Time Search Insert a tape Press Time SearchThis function will not operate dur Ing recording Sleep Timer Press SLEEP/WAKE UP until Sleep TimerPress Menu to exit the Sleep Timer setting Wake Up Timer Before you beginPress PLAY/ or STOP/ to select TV/TAPE Press F.FWD/B or REW/s to select TV orAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Specifications Renewed Index Supplied Accessories