MC09D1MG 3/22/02 1:16 PM Page 30
30 Rerecording (Tape Duplication)
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
Video Cable from
VIDEO OUT to VIDEO In
AUDIO VIDEO
OUT
Audio Cable from
AUDIO OUT to AUDIO In
1 Make the connections shown above, using audio and video cables (not supplied). Connect the source unit (VCR or camcorder) to a power source after connections are made.
2
3 The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR power will turn on automati- cally.
4 Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that AUX appears on the screen.
The TV/VCR is now in Line Input or Auxiliary mode.
5
6
7 To stop copying, press STOP/EJECT on the TV/VCR, then stop the tape on the VCR or camcorder.
STOP
AUDIO | VIDEO | POWER | EJECT |
REC
AUDIO and VIDEO In
Jacks on TV/VCR
Helpful Hints
•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
•Different brands of equipment may operate differently.
•Make sure all connections are secure. Otherwise, you may not record both picture and sound.
•Programs that are copyright protected may not record clearly.