16 Setting the Clock
Set the clock accurately for proper timer recording. If a Public Broadcasting Station (PBS) is available in your area, follow Auto Clock Setting below. If not, follow Manual Clock Setting on pages
Auto Clock Setting
You can have the TV/VCR set the clock automatically by using the PBS channel in your area. Once you have set the clock, the TV/VCR will automatically monitor the correct
1
POWER | SLEEP/WAKE UP |
PLAY
REWF.FWD
STOP
MENU |
| ALT.C |
| DISPLAY | H |
time and date being broadcast by PBS and continuously update the time accordingly.
Before you begin, make sure ...
1 2 3
4 5 6
7 8 9
CH.
●The TV/VCR power is on.
●The antenna/Cable TV connections are correct.
●The Cable Box is on (if applicable). (See Helpful Hints.)
●Channels are set. Details are on pages eight and 14.
1 Press MENU. Press PLAY/▲ or STOP/▼ to select SETTING CLOCK, then press F.FWD/B.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
2 With AUTO CLOCK selected, press F.FWD/B or REW/s repeatedly until ON appears beside AUTO CLOCK.
– SETTING CLOCK –
B AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T.[OFF]
0 +100 VOL.
SPEED RESET PAUSE/STILL
RECORD | SLOW TIME SEARCH MUTE |
3 If you already know your PBS channel number, skip ahead to step 6 on the next page.
If you do not know your PBS channel number, press STOP/▼ to select AUTO CLOCK CH SEARCH, then press F.FWD/B.
– SETTING CLOCK –
AUTO CLOCK | [ON] |
BAUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T.[OFF]
Instructions continue on the next page.
Helpful Hints
•If the TV/VCR is connected to a Cable Box or Satellite Receiver, select the PBS channel on the Cable Box. Set the TV/VCR to the output channel of the Cable Box or Satellite Receiver (usually channel 3 or 4), to set the clock automatically.
•The TV/VCR cannot control or change the channels of the Cable Box or Satellite Receiver.