One-Touch Recording 27
A
●This function cannot be done from the remote control.
●Recording starts immediately when you press REC/OTR.
Before you begin, make sure ...
●The TV/VCR power is on and has a videotape with a record tab.
●If necessary, rewind or fast forward the tape to the point at which you want to begin recording.
1 Press the Number buttons or CH(annel) o/p to select the channel you want to record. Remember, if the TV/VCR is connected to a Cable Box or Satellite Receiver, the TV/VCR must be on channel 3 or 4. Select the channel you want to record at the Cable Box/Satellite Receiver.
2 Press SPEED to select a tape speed (SP/ SLP). Details are on page 10.
3 Press REC/OTR on the front of the TV/VCR to select a recording length. Each press of REC/OTR will increase the recording time by 30 minutes. You may select a maximum recording length of eight hours.
OTR (2:30)
POWERSLEEP/WAKE UP
4 |
| PLAY |
|
| |
REW |
| F.FWD |
| ||
| STOP |
|
| ||
MENU | DISPLAY | ALT.CH | 1 | ||
| 1 | 2 | 3 |
| |
| 4 | 5 | 6 | CH. | |
|
| ||||
| 7 | 8 | 9 |
| |
2 |
| 0 | +100 | VOL. |
|
SPEED | RESET | PAUSE/STILL |
|
| |
RECORD | SLOW | TIME SEARCH | MUTE |
|
3Press REC/OTR on the front of the TV/VCR.
SP
When recording finishes, the TV/VCR will turn itself off.
4 To stop an OTR before it ends on its own, press STOP/p.
Helpful Hints
•To show the remaining time, press DISPLAY. OTR and the remaining recording time will appear briefly.
•The maximum recording time of a
•If the tape ends before the recording’s end time, the TV/VCR will stop recording, eject the tape, and turn itself off.
•You can turn off the TV/VCR dur- ing an OTR. The recording will continue at the length you set.