10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
1
Press the MENU button.
POWER | SLEEP/WAKE UP |
>PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
2
PRESS B
1
| PLAY |
|
REW |
| F.FWD |
| STOP |
|
MENU | STATUS/EXIT | CLEAR |
1 | 2 | 3 |
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
>SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW
VOLUME BAR | [ON] |
SET CLOCK |
|
SELECT KL CHOOSE B
TO END PRESS EXIT
4 | 5 | 6 | CH. |
| |||
7 | 8 | 9 |
|
SLOW | 0 | SURF | VOL. |
| |||
SPEED | MEMORY | PAUSE/STILL |
|
REC/OTR | TRACKING | MUTE |
3
Press the PLAY/▲ button or the STOP/▼ button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. AUTO CH PROGRAMMING ... will appear on the screen. The TV/VCR distinguishes between TV channels and cable chan-
nels automatically, and the TV/VCR will memorize its available | 4 | Wait for the TV/VCR to set up |
| ||
| channels. | |
channels. |
| |
|
| |
4 |
|
|
Wait for a few minutes. When setup is complete, CHANNELS |
|
|
ARE SET will appear on the screen. Then the programming of the |
|
|
lowest channel number placed in the TV/VCR’s memory will |
|
|
appear on the screen. Now, when you press the CH(annel) m/n |
|
|
button, you will scan only through channels you receive. |
|
|
Helpful Hints
• Line Input mode will always be stored in the TV/VCR’s memory as channel 00. You cannot delete it.
• You can not select AUTO PRO- GRAMMING at step 3 if you are in Line Input mode.