34 Timer Recording (cont’d)
8
Press the Number 1 button to record in SP speed or press the Number 2 button to record in SLP speed. Details about tape speed are on page 29. You cannot use the SPEED button at this time.
ONE TIME PROGRAM
PROGRAM | 1 |
CHANNEL | 10 |
TIME ON | 09:30 PM |
TIME OFF | 11:00 PM |
REC SPEED | SLP |
SP=1 SLP=2
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
9
Press two Number buttons for the month and two Number buttons for the day you want the program to record. For example, for July 10, 2000, press 07, 10. The day of the week and the year will be displayed automatically. (You cannot program the TV/VCR to record more than one year in advance.) If you selected a DAILY recording at step 3, you can not enter a date that is a Saturday or Sunday.
ONE TIME PROGRAM
PROGRAM | 1 |
CHANNEL | 10 |
TIME ON | 09:30 PM |
TIME OFF | 11:00 PM |
REC SPEED | SLP |
START DATE | 07/10/2000 |
| MONDAY |
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COM- PLETED PLEASE TURN OFF FOR TIMER RECORDING will appear on the screen.
●If there is not a tape in the TV/VCR, PLEASE INSERT CAS- SETTE also appears on the screen.
●If there is a tape without a record tab in the TV/VCR, PLEASE REMOVE CASSETTE also appears on the screen. If this hap- pens, insert a different tape.
●If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Press the POWER button to turn off the TV/VCR power. The RECORD light will flash slowly if a tape is in the TV/VCR.
If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording is scheduled to begin.
11 10
POWER | SLEEP/WAKE UP |
|
| PLAY |
| |
| REW |
|
| F.FWD |
|
| STOP |
| |
| MENU | STATUS/EXIT | CLEAR | |
8 | 1 | 2 | 3 |
|
4 | 5 | 6 | CH. | |
| ||||
7 | 8 | 9 |
| |
9 | SLOW | 0 | SURF | VOL. |
| ||||
SPEED MEMORY | PAUSE/STILL | |||
| REC/OTR | TRACKING | MUTE | |
Turn off the TV/VCR
for the recording.
Insert a tape in
the TV/VCR.
Leave the Cable
Box/DBS on
(if applicable).
Helpful Hints
•PROGRAM NOT COMPLETED / CLASH may appear on the screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap, and thus the current timer recording will not be carried out.
•To stop a timer recording that is in progress, press the STOP/EJECT but- ton on the TV/VCR. To completely clear the timer recording so it will not resume when the TV/VCR power is turned off, see page 35.
Please see page 54 for more
Helpful Hints.