Memorex MVT2137 Manual Clock Setting, VHF/UHF/CATV Channels, TV mode direct channel selection

NOTES: •

TV OPERATION

MANUAL CLOCK SETTING

You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly.

EXAMPLE: Setting the clock to “8:30 AM”, 26th (SAT) October, 2002.

1To turn on the TV/VCR, press the POWER button.

2Adjust the volume level by pressing the VOLUME Up or Down button. The volume level will be indicated on the screen by green

bars. As the volume level VOLUME 32

1Press the MENU button.

Press the SET/TRACKING + or – button to select the SYSTEM SET-UP option, then press the ENTER button.

2Press the SET/TRACKING + or – button to select the CLOCK SET option, then press the ENTER button.

3Press the SET/TRACKING + or – button to set the month, then press the ENTER button.

4Set the day, year and time as in step 3.

After setting the clock, time and date, the time starts functioning automati- cally.

M E N U

TIMER REC SET

TV SET-UP

CH SET-UP

AUTO REPEAT ON OFF SYSTEM SET-UP

〈+/–/ENTER/MENU〉

SYSTEM SET-UP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

AUTO CLOCK ON OFF

STANDARD TIME DAYLIGHT SAVING TIME

〈+/–/ENTER/MENU〉

CLOCK SET

MONTH	10
DAY	1	(SUN)
YEAR	2000
TIME	12	: 00 AM

〈+/–/ENTER/CANCEL/MENU〉

CLOCK SET
MONTH	10
DAY	26	(SAT)
YEAR	2002
TIME	8	: 30 AM

increases, so do the number of

bars. If the volume decreases, the number of green bars also decreases.

3Set the TV/CATV menu option to the appropriate position (See page 16).

TV	- VHF/UHF Channels
CATV	- CABLE TV Channels

VHF/UHF/CATV CHANNELS

TV	CATV
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36		(A) (W)
	37-59 (AA) (WW)
	60-85	(AAA) (ZZZ)
	86-94		(86) (94)
	95-99	(A-5) (A-1)
	100-125		(100)(125)
	01		(5A)

4 Press the Direct Channel selection buttons to select

the channel.

〈 +/–/ENTER/CANCEL/MENU〉

8:30 AM SAT

NOTES: • After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the present time again if the Auto Clock did not set correctly.

•To move cursor backward, press the CANCEL button.

• TV mode direct channel selection
	When the TV/CATV menu option is in the TV
	position, all channels can be instantly selected by
	using two buttons (for example, to select channel 2,
	press "0", then "2". If you press only "2", channel
	selection will be delayed for a few seconds). For
	channels 10 and above, press the 2 digits in order.
•	CATV mode direct channel selection
	When the TV/CATV menu option is in the CATV
	position, channels can be selected as follows:
•	TO SELECT CATV CHANNELS:
	1-9	Press "0" twice, then 1-9 as needed.
		Example, to select channel 2, press "002".
	10-12	Press "0", then the remaining 2 digits.
		Example, to select channel 12, press "012".
	13-99	Press the 2 digits in order.
		Example, to select channel 36, press "36".
	100-125	Press the 3 digits in order.
		Example, to select channel 120, press "120".

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

CH 012

If a channel with no broadcast is selected, the sound will automatically be muted.

• If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

14

5A3A901A E P12-19 14 3/18/02, 10:07 PM