MZ-NF610
•Adjustment Method of VC1_LOW (PB) (item number: 741)
•Adjustment Method of VC2_LOW (item number: 743)
Set LCD display | Set LCD display |
7 41 | AD ** |
|
|
**: Adjusted value |
|
1.Connect a digital voltmeter to the TP1928 (VCO1) on the MAIN board, and adjust [VOL +]key (voltage up) or [VOL
digital voltmeter
MAIN board
TP1928 (VCO1)
TP1311 (GND)
7 43 | AD ** |
|
|
**: Adjusted value |
|
1.Connect a digital voltmeter to the TP1905 (VCOUT) on the MAIN board, and adjust [VOL +] key (voltage up) or [VOL
digital voltmeter
MAIN board
TP1905 (VCOUT)
TP1311 (GND)
2. Press the X key on the set or the |
|
|
| key on the remote | 2. Press the X key on the set or the |
|
|
| key on the remote |
commander to write the adjusted value. | commander to write the adjusted value. |
|
| ||||||
Adjustment and Connection Location: MAIN board | Adjustment and Connection Location: MAIN board | ||||||||
| (see page 24) |
| (see page 24) | ||||||
• Adjustment Method of VC1_HIGH (REC) | • Adjustment Method of VC2_HIGH |
|
| ||||||
(item number: 742) |
|
|
|
| (item number: 744) |
|
| ||
Set LCD display |
|
|
|
| Set LCD display |
|
|
7 42 | AD ** |
**: Adjusted value |
|
1.Connect a digital voltmeter to the TP1928 (VCO1) on the MAIN board, and adjust [VOL +] key (voltage up) or [VOL
digital voltmeter
MAIN board
TP1928 (VCO1)
TP1311 (GND)
7 44 | AD ** |
**: Adjusted value |
|
1.Connect a digital voltmeter to the TP1905 (VCOUT) on the MAIN board, and adjust [VOL +] key (voltage up) or [VOL
digital voltmeter
MAIN board
TP1905 (VCOUT)
TP1311 (GND)
2. Press the X key on the set or the |
|
|
| key on the remote | 2. Press the X key on the set or the |
|
|
| key on the remote |
commander to write the adjusted value. | commander to write the adjusted value. | ||||||||
Adjustment and Connection Location: MAIN board | Adjustment and Connection Location: MAIN board | ||||||||
| (see page 24) |
| (see page 24) |
20