MZ-NF610
3-4. LCD Module, Button (Control)
Note: On installation, adjust the position of both switch and knob (hold).
switch
3 three screws
4 open locker
1six screws
2LCD module
5 button (control)
case (upper) sub assy
knob (hold)
3-5. MAIN Board
1Remove two solders of the flexible board (over write head).
4four screws (M1.4)
3flexible board (CN871)
8MAIN board
5battery terminal board (+)
6battery terminal
7 flexible board (optical | 2 flexible board (motor) |
(CN501) | (CN701) |
8