Cisco Systems OL-12463-01 quick start Select the time zone settings

Page 6

Setting Up and Configuring Cisco Digital Media Manager 4.0

Task

6. Configure settings for the DMM appliance network interface card (NIC).

Do one of the following:

If the NIC for your DMM appliance should autonegotiate the fastest possible transmission mode when it is connected to another device, select Yes.

If the NIC should not autonegotiate, select No, select the NIC speed, select OK, select the duplex method, select OK, then select Yes.

7. Select the time zone settings.

a.Use the Up/Down arrow keys to navigate through the Time Zone list.

b.Stop when the correct time zone is displayed, then select OK.

c.If the settings are correct, select Yes. Alternatively, if they are wrong, select No to go back and correct them.

8. Select the current month, year, and day.

a.Use the Tab key and the Up/Down arrow keys to navigate and change the selected values.

b.When you are done, select OK.

c.If the settings are correct, select Yes. Alternatively, if they are wrong, select No to go back and correct them.

9.Select the current hour, minute, and second. Use the format for military time (24 hours that increment from 0100 to 2400).

a.Use the Tab key and the Up/Down arrow keys to navigate and change the selected values.

b.When you are done, select OK.

c.If the settings are correct, select Yes. Alternatively, if they are wrong, select No to go back and correct them.

10.Enter a password for the admin account. This is by default the account to use when you administer the DMM appliance. The password that you enter must contain at least six characters. When you are done, select OK.

Tip We recommend that you use a strong password. A strong password has at least eight characters and contains numbers, letters (both uppercase and lowercase), and symbols.

11.Enter a password for the pwadmin account. This is the account to use if you forget your password for the admin account. When you are done entering the password, select OK twice.

After a moment, the server appliance reboots and a login prompt is displayed.

Quick Start Guide for Cisco Digital Media System 4.0

6

OL-12463-01

 

 

Image 6
Contents Contents IntroductionSetting Up and Configuring Cisco Video Portal Set up the Video Portal appliance hardwareSelect the time zone settings Enter IP address and routing informationSelect the current month, year, and day Setting Up and Configuring Cisco Digital Media Manager Set up the DMM appliance hardware Select the time zone settings Click Install/Upgrade License Dm2/apache-tomcat/webapps/DMM/temp/videoportal Configure values for your Video Portal Click Create DeploymentRelated Documentation Select Applications Full Applications ListQuick Start Guide for Cisco Digital Media System OL-12463-01 OL-12463-01