|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setup, cont. |
|
|
|
|
|
|
| Setup, cont. |
|
|
|
|
|
|
|
|
|
| |||||||
Programming for AUDIO
1.Manually turn on your AUDIO device.
2.Press the AUDIO button on the remote control.
3.Press and hold the SET button until the LED LIGHT flashes twice.
4.Find the programming code for your AUDIO device in the code list (on separate sheet) and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
5.Point the remote control at the AUDIO device and press the POWER button. The AUDIO device should turn off.
Note:
•If your AUDIO device does not respond, try all the codes for your AUDIO device brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes, page 11.”
•Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.
8
XRU9M OM
Programming for CABLE or SATELLITE
1.Manually turn on your CABLE box.
2.Press the CABLE button on the remote control.
3.Press and hold the SET button until the LED LIGHT flashes twice.
4.Find the programming code for your CABLE box in the code list (on separate sheet) and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
5.Point the remote control at the CABLE box and press the POWER button. The CABLE box should turn off.
Note:
•If your CABLE or SATELLITE box does not respond, try all the codes for your CABLE or SATELLITE box brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes, page 11.”
•Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.
9
2/6/2010 1:51:43 PM