The Beo4 VMEM / VTAPE button option
On your OneRemote modified Beo4 remote control, the VMEM button can be pro- grammed, to open a specific source on your non B&O TV.
VMEM/ VTAPE options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button.
LIGHT mT01p No new source selected.
LIGHT mT11p The AV1 socket on the TV is opened.
LIGHT mT21p The AV2 socket on the TV is opened.
LIGHT mT31p The DTV tuner on the TV is opened.
LIGHT mT41p The Component 1 socket is shifted to.
LIGHT mT51p The Component 1 socket is accessed.
LIGHT mT61p The HDMI 1 socket is accessed.
LIGHT mT71p The HDMI 2 socket is accessed.
LIGHT mT81p
LIGHT mT91p USB Wiselink
As the OneRemote controller is able to operate many different TV models, there might be some sources in the table, that is not available on your TV. The only way to find out if your TV accepts these codes, is testing each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs original remote control. Using the source button.
12