Beo4 NAVI mode option.
Newer Beo4 models are named Beo4 Navi due to an added special navigation button. A joystick type control button, placed where previous Beo4 models have a Obutton.
If your Beo4 has a Obutton, this chapter is not relevant for you !
Use of the Beo4 Navi joystick navigation operation:
Enter one of these 2 codes within 10 seconds to enable or disable the OneRemote controllers use of the ex-
Set the Beo4 Navi remote control in operation mode 2, as described in the B&O user guide that was sup- plied with your Beo4, if you want to use these. Otherwise select mode 1.
LIGHT mq51p Enable use of the NAVI control.
When the OneRemote controller NAVI mode has been enabled, use the operation table on page 9.
LIGHT mq50p Disable use of the NAVI control.
When the OneRemote controller NAVI mode has been disabled, use the operation table on page 8.
10