The OneRemote controller for the Beo4 remote control
The OneRemote controller is a small microcomputer module, which is specifically made to be built in to a Bang & Olufsen Beo4 remote control.
The controller captures the commands that were meant for operating a Bang & Olufsen device. Before the commands are emitted from the Beo4, these commands are convert- ed, and therefore also able to operate a non Bang & Olufsen TV.
Each controller is dedicated for operating a specific product like an Apple iPod docking station, a flat screen TV, a curtain controller etc.
The controller makes the Beo4 able to operate a third part device, still able to operate any other Bang & Olufsen products.
If there is a Bang & Olufsen audiomaster in the room, it can be used for handling the sound. Speakers con- nected to an audiomaster are of a much better quality than the speakers in a TV. In a B&O linkroom setup with Beolink Active or Beolink Passive, you can also use these speakers to improve sound from most TV’s.
Only a simple audio cable is needed between the TV and the audiomaster. See the option programming sec- tion about AAUX and PC modes on page 11.
4