STEREO SYSTEM
Version 5/19/2009
VIZIO VA320M User’s Manual
Connecting an external
Receiver/Amp
Optical Output of Audio received with HD Programs If your sound system has an SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area on the back or your HDTV). This is active when receiving audio with the program being viewed no matter what input is being used.
1.Turn off the power to the LCD HDTV and Receiver/Amp.
2.Using an audio cable (optical cable), connect the cable to the audio input connector on the Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connector at the rear of the LCD HDTV.
3.Turn on the power to the LCD HDTV and Receiver/Amp.
4.Then press the MENU button on the remote control to open the
5.Press the 
on the remote control to select the Audio menu.
6.Press the 
on the remote control to select
SPEAKERS.
7.Press the MENU/SELECT key on the remote control to select OFF so that the sound from the HDTV will now be routed through your Receiver/Amp system.
Press the ◄ key once to return to the previous screen or repeatedly to return to your program if task has been completed or press the EXIT key to close the OSD screen and exit to watch your program.
Note:
Refer to your Receiver/Amp user manual to select the corresponding audio input.
The audio output can not be connected directly to external speakers.
21
www.VIZIO.com