VIZIO VA320M User’s Manual
Connecting a PC Computer
1.Turn off the power to the HDTV and PC Computer.
2.Connect a
3.Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area on the back of your HDTV). This connection will require an 1/8” stereo mini plug.
4.Turn on the HDTV and PC Computer.
5.Select RGB using the INPUT button on the remote control or on the side of your HDTV.
Note:
For the best picture quality when connecting a pc computer through RGB PC, set your pc computer timing mode to VESA 1366 x 768 at 60Hz. Please refer to the pc or graphic card’s user guide for additional information on how to set the timing mode and the video output requirements of the product.
A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an electronics store.
COMPUTER
Connecting a USB (FAT32 Format)
Storage Device
1.Connect a thumb drive, directly inserting it into the USB connection or by using an extension (if thumb drive housing is too big to have it fit in place) cable. Connecting a portable hard drive or card reader to this input is also possible
2.If your HDTV has been turned off, please turn it on.
3.The TV will start reading the contents in the USB device automatically to make sure of compatibility of files (MP3 or JPEG format).
4.Please follow the instructions in the Multimedia section to either see the pictures (picture by picture or as a slideshow) or listen to music (single song or all selected songs) or picture/music combination (slideshow with background music.
Note: This input is also used as factory service port. Please back up important files to prevent lost of data. Format your device to FAT32 and load your picture and music files, and enjoy your viewing. For Pause/Live TV a fast speed FAT32 storage device is also needed, for a better performance at least a 1GB of memory should be used.
Preset PC Resolutions
22
www.VIZIO.com