VIZIO VW26L HDTV10F User Manual
c.The TV Input screen will be displayed; default choice is Antenna. If you are using Cable,
press the 
button to highlight
CABLE.
Press the 
button on the remote to go to the next screen.
d.The Channel Scan screen will be displayed; default choice is Scan. Press the OK button on the remote control to commence the search for available channels to be stored into memory.
If you do not want to scan for channels at this time, press the 
button on the remote to highlight Skip Scan and then press the OK button.
e.The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels.
Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get information about availability in your area, type of antenna and in which direction to point your antenna. The channel availability through cable depends upon which channels your cable operator supplies in Clear QAM; consult your cable operator for more information.
f.When finished, the Complete screen will be displayed to informed that the HDTV has completed the Initial Setup.
Press the OK button on the remote control to exit and begin watching TV.
Version 2/6/2007 | 26 |
| www.VIZIO.com |